Related Forum Threads
- Custom Critter Carriers,Coops,Tractors,Hutches;etc Last post on 2/23/13 at 7:34pm in Where am I? Where are you!
ChooksChick's Hints for Henthusiasts
Edited on 3/30/13
- Serenity Garden Coop (Witchita Cabin knockoff)Edited on 3/18/13
- Virginia Woodland CoopEdited on 4/28/13
- Mukilteo Coop
- topicMedium Coops
Alphabetical Article List
Elmo's Chicken Coop
I've wanted chickens all my life, but it took some nudging from my bird loving daughter to finally make that dream a reality. A friend gave us five newly hatched Serama hybrid chicks in the spring of 2009, and now the only thing I regret is not getting chickens sooner!
We live in North Texas, so the first thing I built was a summer coop/run, suited to our hot summer weather. It is 8' by 8' by 6' tall at its highest point. We call it our Tiki Coop.
I used an Easy Up enclosure kit (http://www.amazon.com/gp/product/B000E3ZQIE) because I had never built anything before and I was uncertain about how to go about it. Now, with the benefit of hindsight, I wouldn't have bothered with the kit. I used 1/2" by 1/2" 19 gauge vinyl coated wire that I ordered from http://www.wadavidson.com/. Instead of digging a trench and burying wire to deter digging predators, I continued the side walls down, extended an apron out onto the ground 12-18 inches, and tacked it down thoroughly using lots of landscaping staples. I used wood screws to attach the wire to the frame, and spliced the wire panels where they met in the middle using UV resistant cable ties and Loxit clips. I roofed the summer coop with Suntuf panels and also made a back wall and partial side walls with the same material. I chose the smoked panels, rather than the white ones (which would probably have been cooler) for light and for looks.
It didn't take our five bantams very long to dig up all the grass in this coop, so I put down a bed of sand. I put a long rectangular plant tray under the roost and simply dump the poop into our compost and hose off the tray every morning. Then I go around the run with a kitty litter scoop and pick up any stray poops in the sand. I love sand!
By the way, that isn't a bush growing inside the coop, those are cut bamboo boles that I replace periodically (we have plenty of spare bamboo growing in our yard). I like how it looks, and the chickens seem to like roost under the branches, too.
What I should have done differently: I should have placed this coop somewhere in our yard where it wouldn't have received afternoon sun. In our sweltering summers, this coop gets very hot even with its open sides and shade tarps, and the heat lingers on into the evenings. However, in the winter, this is a benefit.
Since our bantams are so tiny they would be vulnerable even to roaming neighborhood cats, we don't free range them except with supervision. But I wanted them to have the benefit of scratching around in the grass, so I built some daytime tractors.
Here's my first model:
I made it using an old trampoline frame that I painted and wrapped with the same wire I used on the summer coop. Over the wire, I attached a willow rolled fence for looks. It's 8' in diameter, and almost 3' high.
I also constructed a wire apron lying on the ground for the tractor, but of course I didn't tack it down. The apron helps to prevent a chicken from squeezing out under the wire someplace the lawn isn't quite level. Our yard is fenced, so hawks and cats are the likeliest risks during the daytime, and the tractor ought to thwart them. It isn't raccoon-proof, though, so we move the chickens into a more secure, stationary coop/run when we leave the house during the daytime, just in case a raccoon drops by.
I used some rope and a branch to fashion a handle that I use to lift up one side of the tractor and drag it around the yard every day or so. You can't see it in these photos, but I cut a chicken door in the side, with a wire door flap and a bungee cord fastener (the door gets covered up by the wicker siding too after the chickens have gone in). The chickens quickly got used to the routine of going into the tractor in the morning (I throw some scratch in there first thing, which helps motivate them). At the end of the day, I let them out to free range in the yard under my supervision, then I herd them into a stationary coop/run for the night. After the hens started laying, I realized I needed to cut another door in the roof to insert and remove a nestbox.
Model no. 1 had some design problems. Every so often as I dragged it around the yard, the apron would bend under the edge and it was a hassle to straighten it out. The darn thing was also too heavy. And the plastic edging covering the sharp wire door frame kept popping off and was difficult to get back on. Plus, since the roof was flat, I couldn't easily tarp it in case of rain. So....ta da!... Tractor Model no. 2:
This time, I hinged the wire apron so I can easily flip it up and out of the way as I'm lifting one end. This one is lighter than the previous model (although the willow fencing itself is actually the heaviest component). I can easily tarp it for shade or put some leftover polycarbonate panels on the sides for rain protection. I like this one! It's 8' by 8' and around 4 1/2' tall at the peak. The door is large enough for the portable nestboxes I use to be easily put in and taken out, as needed.
But I needed another tractor as a grow out pen for some chicks we hatched out in the summer of 2010, so I tried another design. Here's Model no. 3:
This one is 6' wide by 12' long, and around 3' tall at its highest point. I bought the row hoops from FarmTek: http://www.farmtek.com/farm/supplies/prod1;ft1_greenhouses_accessories-ft1_coldframes_2;pg104155.html, painted them black, fixed them to a wooden baseboard frame, then wrapped the thing with vinyl covered hardware cloth. It was very quick to add the wire to a frame like this, although the ends were fiddly because I had to cut the hardware cloth to fit the semicircular shape. I think I like this tractor the best of all: it's very easy to tarp (that's a plastic drop cloth on one end in case of rain today), and it's the lightest and easiest to move of any of the tractors I've built (so far. Who knows? There may be a Model no. 4 in my future).
Last fall, I also built a winter coop because I was nervous about how cold tolerant my tiny bantams would be.
The coop itself is 4' by 4' by about 4 1/2' tall at the highest point, the whole thing on 2' legs. The attached run is 8' by 8' by 6' high.
I used 2 by 2's for the framing, plywood inside, a layer of reflective insulation, then another panel of plywood on the outside. I used clear Suntuf panels on the roof. I hoped that the clear roof would provide light (without the need to cut windows in the side of the coop) and make the coop warmer for the winter. So far, the temps inside the coop run 5 to 10 degrees higher than the outside temperatures during the day, but that heat is quickly lost when the sun goes down because of the lack of insulation on the roof. So my solar experiment is a failure, except to the extent that on cold winter days the chickens will have the option of hanging out in the coop to warm up if they want to (with the nest box inside the coop, it will be a warmer place for them to lay). This coop will be way too hot for use in summer; that much is obvious. However, the run does come in handy and I've been using it to separate my adult chickens from the teenagers in summer.
Here's a picture of the inside of the winter coop:
This whole front wall opens up for access. There are two flaps covering the wire covered front vent at the roofline so I can close down half or all of it. There is another wire covered vent on the top of the back wall that stays open.
A removable board at the front keeps the sand substrate inside (easy to keep clean, but a tad chilly). I put a boot tray under the roost at night and clean and hose it down every morning. There's a sliding door inside covering the pop door, with an outside drop down door that I can open from inside the coop:
The chickens use the drop down door as their perch for entering the coop.
All of the doors to my coops are double latched at the top and the bottom of each door and secured with a spring operated clip like this:
What I would have done differently on this one: I didn't roof the run initially, and when I tried to add the roof later, it was sort of a mess. I didn't build enough slope and the lack of overhang on the coop side also meant the roof developed a couple of very small but very pesky leaks. So this fall I bit the bullet, took the whole roof off and redid it, somewhat more properly:
I copied the roof design of The Garden Coop http://www.thegardencoop.com/. The top of the enclosed coop is covered with hardware cloth, and I can cover it with insulating panels in the winter if I want to cut back on some of the ventilation. However, my plans are now only to use this during daytime.
Here's the winter version of our Tiki coop:
I attached 6 mil plastic to 3 of the sides then covered the plastic with cheap rolled reed fencing. The plastic provides wind block and the fencing helps keep the plastic from flapping around. On sunny winter days, it's quite cozy inside this run.
For those of you wondering whether to build yourself or buy a coop ready made, let me offer this perspective. It was a lot of work to build these coops (and a few times during the summer when the sweat was pouring off me like a waterfall and the mosquitoes were eating me alive, I did cuss a bit and wonder whether I was completely insane for trying to build my own coop). However, I got to build them exactly the way I wanted them. I think it was easier to do this, than to buy a prebuilt coop and then fiddle with modifying it to suit.
I built everything shown on this page without the use of any power tools other than an electric drill/screwdriver, because I reasoned in my inexperienced hands a power saw was not worth the risk to my limbs. I had the plywood and the 4" by 4" post cut for me at Home Depot; the rest of the wood I cut to size using a small hand saw. That's why most everything I built is based on stock lengths of 4' and 8', because I was trying to minimize the number of cuts I'd need to saw. Certainly someone better at construction than I am could do a better/quicker job than I did; but here's proof that even someone with no skills or experience starting out can get the job done.
I didn't keep a tally of the costs for the summer coop/run and tractor, but the winter coop and run cost me about $600. And the satisfaction of building something yourself? Priceless.
And yet...I thought it was only fair (since I've tried just about everything else) to see what it would be like to hire a professional builder to construct a coop larger than I felt comfortable tackling on my own:
- Serenity Garden Coop (Witchita Cabin knockoff)
- › Show off your roosters 1 minute ago
- › Ducklings dying - PLEASE HELP!! 3 minutes ago
- › Beautiful Tolbunts! " Pick Your Own Chicks!" Both Smooth & Frizzled... 5 minutes ago
- › Help! Dog bumped incubator.. Egg cracked on day 20 5 minutes ago
- › Maine 6 minutes ago
- › URGENT- One of my newborn chickens has both his legs tucked up and... 7 minutes ago
- › information on egg carton incubation 7 minutes ago
- › Southern NY, Dutchess county and below 9 minutes ago
- › **~~>>Second Annual Cinco de Mayo Turkey Hatchathon<<~~**all... 9 minutes ago
- › Silkie thread! 14 minutes ago
- › Cream Legbar originally bred by R. C. Punnett by KPenley
- › Silkie by Chickie Mama
- › Brahma by Chickie Mama
- › Leghorn by Lisasfeathers
- › Andalusian by nova022
- › Mini Cup Automatic Waterers by KPenley
- › Barred Rock by applefalls
- › Australorp by applefalls
- › Star by applefalls
- › Partridge Plymouth Rock by cybercat
- › Hatching<3 by Nike
- › Blue and Whie Delight by 12chickenlover3
- › Coop La Fiesta by jpruett86
- › The Truth About Insuring Hatching Eggs by Poultry Friend
- › Gabe's "budget coop" by GabeStalker
- › Burnsville Minnesota by sn0wwhite
- › ♥♥♥♥A chicken... by OnceInALifeTime
- › Where Chicks Rule by woodsygal
- › What I didn't know about ducks... by BCBunnies
- › 2seth2 breeder page by 2seth2