Posts by fantastic4

OK I have built 5 super sucessful forced air incubators and im stumped!  I use HWH thermostat.  I drill it out to make it more sensitive.  This one I just built the light is just flashing on and off.  I have never...

I do have my thermostat placed close.  I am getting a great steady temp but my air isn't circulating correctly like above pic.  Although I have a steady temp it is uneven.    When I open vent holes on front, my...

is it not going to gauge the temp of the bulb and heat up more that the bator? Im having temp issuse!   My bator is bigger but similar to this...

now if i can get my few minor qwirks worked out we will see how it goes :)

LOL guess Without the turner water etc it does look confusing.  An incubator.  Thats the concern with uneven temps.

I built a 3/4 in plywood box  12in high and 2f 2in X 2f 11in.  It has ceramic tile (scraps) on all sides and bottom (not top.) 2 socket fixture is mounted on back (short) wall.  I have a modified Lower Hotwater...

Had to scratch sink, my dad called and needed it badly ;( Ive built a 3/4 inch plywood box, and it is on!!!  heating up and watching temps a few days I don't know that I "insulated" or built a huge heat sink but either way the...

or maybe rewire it and nix that one for a HWH thermostat???  use the modification somewhere above and try that?  if you do let me know im currious!

One nest is fine for up to 4 hens some say 6

Mine was brand new!