Posts by teesquare

Quote: Originally Posted by Scifisarah  Quote: Originally Posted by teesquare   1/8th'' or less is all you need - which should not weaken the board for your...

Quote: Originally Posted by Scifisarah  I just can't groove it too deeply because it is a hollow board. I also now think it may be too narrow for my rooster's widely set cochin legs, even though it is only about...

Have you tried grooving the board ? I really believe you will find that will work, because it gives them a place for their nails and toes to grip.   Just like raised rungs do....

Quote: Originally Posted by NJchixs  Quote: Originally Posted by Mavrik  You could also make your own non-skid.  Paint the plank, sprinkle course clean(washed) sand, then paint over the sand...

Quote: Originally Posted by Scifisarah  Of those saws, we only have a circular saw but maybe we will try that. The composite decking is the hollow type, but I think it is still thick enough to handle a 1/8 groove...

Quote: Originally Posted by fried green eggs  Quote: Originally Posted by teesquare  The tread tape may work - if the surface is smooth enough for it to bond to...

The tread tape may work - if the surface is smooth enough for it to bond to it.   Here is another option for you: Have someone with a sliding compound miter saw or radial arm saw cut grooves across the width of the board that...

Quote: Originally Posted by debiraymond  We had one of our grandsons yesterday and the daughter came for dinner tonight with the same one and another.  It was a good weekend.  And good weekends are to be...

Good to know - I have several TSC's in my area. Do you find that the granules work their way to the bottom?

Quote: Originally Posted by bradselig  I turned my 10x16 shed into a 10x10 coop (the other 6x10 is storage).  My dad got me a big rubber mat that is actually used for industrial roofing that I placed on the...