Posts by Dogginfox

bump  

I am in need of a new Thermometer for my incubator, I have read great reviews regarding the Spot Check and Egg O Meter Thermometers. Also I  can find no information on probe length for either, Both probes look very short in all...

IT heats the Whole Cabinet, The link is just for the heating element which is nothing more than porcelain insulators and a long wire spring. You will need a separate thermostat to control the heating element, any type of thermostat...

In my Homemade Cabinet incubator I used the heating element from a GQF Sportsman, It was sized right, EASY to install and designed for just that purpose .   https://www.gqfmfg.com/store/comersus_viewItem.asp?idProduct=115

Sold

I am building a hatcher to go along with my incubator, I have sourced a thermostat from an old Little Giant Styrofoam Incubator. However I can not find the wiring Diagram to wire it up! I need to know what wires to connect to the...

I have almost completly finished the Incubator!!! I have had a VERY busy January and February so far and have had little time to do things for myself. I am currently testing it to see how well it holds heat, handles drafts, humidity,...

Is there a way to test Electronic thermostats? I just installed a GQF brand Multi-turn thermostat in my incubator and it heats 100% of the time!!! It will not cycle off and on like it is supposed to. I would like to make sure its the...

Put on the first coat of Minwax Fast Drying Satin Polyurethane!The poly has definitely made the grain on the wood POP a little more and darken/yellow the cypress just a bitI think after 3 coats of Poly and a Topcoat of Wax this thing is...

Thanks for all the kind words! This has been a great learning experience and a very fun project. For anyone wondering about the motor setup The powerhouse is a Brevel model R " 2-1/2" & 2-3/8" centered Design Type...