DRAWDOWN = LOCKDOWN
Hi. I'm hoping someone can help with this.
After having a very difficult hatch (3/24) with a new Farm Innovators model, I used the advice here and calibrated my accurite digital hygrometer/thermometer, as well as a submersible glass bulb for temp - calibrated by the ice method. The accurite was off by 4 degrees (reading low) after the salt test and the separate thermometer was reading 2 degrees high.
I now am calibrating both of those to the new incubator's digital hygrometer/thermometer. These are my findings:
The glass thermometer( factoring for -2deg) and the incubator thermometer are pretty much spot on. The Accurite temp is close, however it took 3 hours to read that temp.
The problem is the hygrometer.
The Accurite hygrometer (factoring the +4) and the incubator hygrometer differ by 16 degrees.
Can this even be possible? What the heck?
If so, it is no wonder that my last hatch was so pitiful. The incubator hygrometer is reading 16 degrees low, which would mean that at lockdown, when I had it all the way up to peak of 75, it was actually at 91 pct humidity. Basically soaking wet. UGH. And throughout the first 17 days, when I thought my humidity was 40-55 (too high, I know), it was actually 56-71 pct.
I just want to verify with you that are experienced in calibration that this is first, possible, and second, that I have taken accurate steps to correct the readings.
Thank you in advance for your help.
so you have done the bag salt method on the hygros?
WHAT!!! you are not reliable? since when??? @campingshaws
CH is that you??? YOUR HERE!!! WOW !!! HI CH GOOSERS DOING GOOD?
LMAO!!! oh stop that!!!!
And BTW you dont have to do eggs, did you see even used chicken nicknacks in good shape etc! And BYC GFMs work awesome!!!
CH you drive me insane!
You act like I was gone FOREVER and you NEED me so BAD! and then BAM
as usual there is no response!!
winks! sounds like a plan!! Thank you!!!