alright, I set my eggs just barely (like 30 minutes ago) in the classroom at my kids school. I let the incubator (brinsea mini advance) sit and warm up all morning. While I was there the turner started going and I noticed only 2 of the 7 eggs are turning--the smallest two. I marked them all with an X on the top and an O on the bottom so the teachers can watch them today and see if they start turning. I turned in manually with my hands also and sure enough, only two are turning properly. I played around with the placement of the eggs trying to get them to touch the bottom, but they just aren't doing it.
Here's some info: 7 barnyard mix eggs of various sizes, 'bator set at a 12 angle, turning every 60 minutes, with a 1 hour of cooling sometime during a 24hr cycle. I set the eggs with the pointy end to the outside and made sure the turner was put in the correct direction (with the dividing lines facing up)
What else can I do to get the eggs to turn? It's in a classroom, I don't want the teacher to have to worry about coming in over the weekends to manually turn the eggs.