I installed two lamps & two fans incase one fails I will not loose the whole cluch.

I ran into a problem with my soldering gun.  The batteries were dead so I got side tracted.

(Warning: Before completing, this step should be modified from how I did it.)

I cut out a hole to mount plexi glass in, riveted in place & drilled holes to fill with AB foam.

I cut too close to the sides & should have stoped on the shallow parts of the ridges & riveted them also.  Maybe too much AB foam also.

 

I will probley fire it up tomarrow & see how it works.

I am changing the bulbs out to incacndescent.  The flowerscent will work but I think incandescent would be better.  I think it would recover from heat loose faster & I dont know how the high humitity would affect the flowerscent.

I added some vent holes.

 

I used baby food jars for humitity & a few rocks to help stabelize heat.

 This is the part I cut from the top & I'm useing it to stop direct heat from the lights.

These were my volanters to test the habitat.

Here is a look at my software.  It tells me if something goes wrong.

I will be putting these guys in tomarrow.  Wish me luck.

There is so many pictures that this page would go forever.  The things that are still in the works are: I need to find me a new heat deflector that goes all the way across (I made one out of metal but it made it hard to control heat), build a auto egg turner (gears are turning in my head), & I need to find a better way to control humitity.  I hate to add a humistat but I don't know what else to do.

I'm sorry if you have to read through a lot of spelling errors but thats not one of my strong points.  If you have any suggestions for improvement please let me know.

 

Please check out my Chicken Pluckin Page !