Wall Feeder
Adapted from Nifty Chicken
Adapted from Nifty Chicken
Started out with plain wall. Studs 16 in apart.
Built a very crude box to attach to the wall.
Added trim to front of studs to attach plexiglass. Be very careful not to scew plexiglass in to tight. It will crack.
Cut a board to fit inside the box to control the downward flow
Big crack that I put duck tape over & a picture of feed bag on top. lol
Shown below with 25 lbs of feed. Will hold 50 with no problem.
Girls are wondering what in the world I am doing messing with their feed.
All of this was constructed with things I had laing around. The only purchaes was the plexiglass at $2.15 a sheet.
Thank you Nifty for giving me the idea.
