Ok, I started my chicken run/tractor. It's 4'X8'X3H

This is where the run will end up.
33375_photo1.jpg

The dogs watched but weren't much help.
33375_photo2.jpg

Got it standing and added some supports for stability.
33375_photo3.jpg

Door frame for connector to the raised coop.
33375_photo4.jpg

Painted before the hardware cloth goes on.
33375_photo5.jpg

added a hinged opening
33375_photo6.jpg

hardware cloth on, roof and ramp added
33375_photo7.jpg

Was about to add the wheels but the bolts were too short.
33375_photo8.jpg

I took pictures with my other phone of the coop construction...I'll get those eventually
33375_coop.jpg
Here's the inside with the perch and vynl layed down.
CIMG0039.jpg
I have three open sides with each side able to open up. The coop is 4X4X4 raised about 3 feet.
CIMG0040.jpg
I created a large box for shavings lined in vynl, removable for ease of cleaning.
CIMG0042.jpg
Box slides right in...I have a couple of LED lights in there for nightlights.
CIMG0043.jpg
The opening to the nest boxes is on the right.
CIMG0044.jpg
View from the opened nest box, added hay and golf balls to help things along.
CIMG0045.jpg
Beginning of my "tunnel" going from coop to tractor.
CIMG0048.jpg
Set a few stairs...
CIMG0049.jpg
Painted with an outdoor paint to seal up the wood.
CIMG0050.jpg
CIMG0051.jpg
CIMG0052.jpg
I enclosed the whole tunnel in hardware cloth, using roofer nails to nail it on.
CIMG0058.jpg
CIMG0059.jpg
That's an automatic waterer in the chicken run to slowly fill up with water all day...it's made for dogs but it works well.
CIMG0060.jpg

Still need to fix the opening for the run, I didn't paint it to seal it soon enough. And I need to get the roof finished.
Also...automatic door and a food feeder so I can leave home for a few days.