Navigation

  1. Chicken Breeds 4K
  2. Chicken Coops & Runs 1K
  3. Eggs 654
  4. Brooders, Incubators, Feeders & Waterers 2K
  5. Other Poultry 835
  6. Miscellaneous 2K
Browse albums

Media comments

Most media items

  1. Kiki
    11,999

    Kiki

  2. casportpony
    9,409

    casportpony

  3. R2elk
    3,483

    R2elk

  4. COChix
    3,182

    COChix

  5. WannaBeHillBilly
    2,246

    WannaBeHillBilly

Media statistics

Categories
6
Albums
39,841
Uploaded media
517,219
Embedded media
667
Comments
14,114
Disk usage
593.3 GB

Media added by azygous

  • 1
  • 0
Chick feeder for FF

Chick feeder for FF

  • 1
  • 0

  • 1
  • 0

  • 1
  • 0

  • 1
  • 0

  • 1
  • 0

  • 1
  • 0

  • 1
  • 0

  • 1
  • 0

  • 0
  • 0

  • 0
  • 0

  • 1
  • 0
Deer netting added to dowels with clips to keep heating pad from slipping down through dowels when chicks climb on top of it.

Deer netting added to dowels with clips to keep heating pad from slipping down through dowels when chicks climb on top of it.

  • 1
  • 0
Or narrow the opening by pushing the sides together.

Or narrow the opening by pushing the sides together.

  • 1
  • 0
By the end of second week, chicks will need less heat. You can utilize the upper holes to raise up the heating pad, and also you can spread out the sides for a wider opening to the cave.

By the end of second week, chicks will need less heat. You can utilize the upper holes to raise up the heating pad, and also you can spread out the sides for a wider opening to the cave.

  • 1
  • 0
Slip dowels though holes. Holes should be much smaller than dowels so they fit snugly without slipping. Lay heating pad over dowels. i cut a slit in back for the plug to slip through. This is the position for maximum heat for the first week.

Slip dowels though holes. Holes should be much smaller than dowels so they fit snugly without slipping. Lay heating pad over dowels. i cut a slit in back for the plug to slip through. This is the position for maximum heat for the first week.

  • 1
  • 0
Cut a rectangle out of pad 45" long x 9" wide Score rectangle at 16 in from each end so middle panel is 13" wide. Don't cut all the way through., just enough so foam will bend and make 90 degree angles Drill or poke 1/8" holes : holes 4" & 8" up from bottom and 4" & 6" up from bottom and 4" up from bottom on each end panel.

Cut a rectangle out of pad 45" long x 9" wide Score rectangle at 16 in from each end so middle panel is 13" wide. Don't cut all the way through., just enough so foam will bend and make 90 degree angles Drill or poke 1/8" holes : holes 4" & 8" up from bottom and 4" & 6" up from bottom and 4" up from bottom on each end panel.

  • 1
  • 0
Chick cave brooder materials (3) 17" 3/8" dowels Foam sleep mattress Heating pad Survival aluminized poly blanket

Chick cave brooder materials (3) 17" 3/8" dowels Foam sleep mattress Heating pad Survival aluminized poly blanket

  • 1
  • 0

  • 1
  • 0

  • 1
  • 0

  • 1
  • 0

  • 1
  • 0

  • 1
  • 0

  • 1
  • 0
Back
Top Bottom