Miters! We miter cut small pieces of wood for the corners that we could screw into from the side studs. We put two on each corner, one at 2' and one at 4'. We have covered the whole thing in plastic as there is a storm approaching. [crossing fingers]
The missus believes the effort to cover the...
Vinyl Flooring Installed. Yesterday we cut to rough size the vinyl flooring and glued it in place. Then this morning I cut it to the correct size.
Half Way Framed. Half of the walls are up at this point. Pretty quick progress. The frames are plumbed and then screwed at the bottom. We get them...
Middle Sections Pre-Assembly. We pre-built these sections for all the walls. Now we are assembling them. The horizontal pieces are each 42", three of those. The window/vent frame has two 10" pieces. The two long pieces are 63.5". We squared these up and screwed two screws per board. The screws...
Half Way Framing. We got half the framing for the walls done. We have the two center parts for all the rest of the wall frames ready to assemble too. Looking good so far.
I am very picky about things being square, the missus is not always so happy about my wish for preciseness.
We did a big run...
Hey everybody! Thanks for following along!
Hope to have much more progress tomorrow, and I will be sure to post photos of it.
I will definitely put together a shot with dimensions and where screws went etc.
It's something I would like to see, so I am going to get it done.
Hope everyone has a...
Quote:
I am 'letting' the missus direct the construction. I do the cutting of wood and the screwing pieces together. She measures, and figures out how it all fits together best. Teamwork.
Quote:
Thanks. I hope they do. They broke out today whilst we were busy constructing their new home...
First Wall Frame. We built one wall to start. This was to see how best to put it all together. The walls will have either a window or a vent in the top framing part. The door's wall frame will have the two inner studs out at the edge instead.
All Wood Cut. After having built the first wall we...
We started constructing the frames for the walls. I managed to get together sixty three 2" x 4" x 8' boards. Strategy now is to take the car to Lowe's. Go through about 40-50 boards (minimum) and pull out 10 decent boards. Trying to do more than 10 is painful. Then bring the boards back in the...
Floor Installed. We positioned the floor pieces and screwed them all down on 16" centers, with a couple of extra screws where we thought it would help. I've put plastic sheeting over it for now, clamped down with clampy things and a couple of pavers in the middle for good measure. Walking around...
We went to Lowe's and went through at least 100 boards and came home with 33 decent ones. By decent I mean straight and smooth-ish, there's not going to be dry-wall covering these up, just some paint. We're going to try a different Lowe's tomorrow to get the remaining boards we need. It was a...
Painted Floor. I finished painting all surfaces of the floor pieces, four coats of barn & fence paint. Not screwed down yet, it's a two person job to get these lined up correctly. My word, that is bright!
The missus is not working tomorrow, so we plan on doing a run for wood for the walls. Each...
Hi everyone!
Wanted to give a quick update ...
This part is a not so exciting ...
Kind of like watching paint dry ...
Well, actually, it is *exactly* like watching paint dry!
(Enjoy your popcorn, for now.)
Two coats on the floor pieces yesterday, putting two more on today.
That ought to do it...
Thanks for all the responses everyone!
I am trying to keep the updates regular.
Final Joists. Spot the difference? Oops, we forgot to include joists under one edge of plywood. So we quickly remedied the situation. Now we have a couple that are close together. We'd probably have spaced those...
Nice gazebo!
Joist Finished! We added a few more joists in for good measure. The floor should be rock solid with all those in there now.
Corner Close-Up. Our design gets modified as we build. When we started off we made the main component the size it needed to be so that a whole 4' x 8' sheet...
The missus suggested making the run go up to the edge of the house, which is vinyl siding, and leaving off framing and hardware cloth for that side. As the house would provide the side for the run there. Anyone got any thoughts on this? It's likely a small difference in wood and hardware cloth...
Base Completed! We tied the base together forming the area for the under coop run. This makes the whole thing look and feel really solid. Very pleased with the result so far. We just need to add a few short braces in the floor joists for extra strength. I walked around on the top and the centre...
We're in rural Gettysburg, PA.
Storm is passing through now.
Really wet and some thunder/lightning.
The forecast is not looking good for the next 10 days.
We may have to get creative with the construction.
Like paint everything before assembling outdoors, and doing that during the dry...
Octagon! There you go. That's more like it. An octagon. It needs more support though. We are sticking with 16" centers for joists, so let's add some more, eh.
And we're ... Done For The Day! There's the base then, all level and plumb, and we are really tired for it. We've cut, mitred, clamped...
Plus! Here we have attached the two side components to the main one. Things are taking shape, but this is not the shape we are looking for now, is it? No. No it is not.