bell waterers and large reservoirs

[HeatherFeather]

Hello,
I would like to plumb several bell waterers onto a 65g reservoir. So far I have only ever used a 5g pail, and 2 5g pails connected together. Can anyone tell me if the 65 g barrel will create too much pressure and cause the bells to leak? If so how do I reduce the pressure?

Thanks much in advance. Plumbing is so not my area of expertise!

Heather

 

[Den in Penn]

If you are asking about using the bell waterers that use vacuum to hold the water, then you really can't connect them together. Consider nipples or cups with a pressure reducer.

 

[Rich386]

If you are asking about using the bell waterers that use vacuum to hold the water, then you really can't connect them together. Consider nipples or cups with a pressure reducer.

Her is your answer to the problem.
Always full always clean.