Home made automatic PVC feeder

feloniousbitcoin

In the Brooder
May 11, 2020
8
39
31

Made with 3 inch PVC.
2 x end caps.
3 x 3 inch pipes.
1 x connector.
1 x 90 degree elbow

additional materials needed:

- drill (compact or normal will work).
- PVC cement (optional, not necessary).
- 3 inch hole saw.
- pencil or marker to mark center and line up where holes will be drilled.
 
Last edited:
We have 3 in our coop that I love. Easy to fill and they don’t throw around as much. I had one in the run too but the angle cause water to get in every time it rained so I took that one out. I’m sure modifications can be made but for now the three work well for us!

It’s possible to prevent water from getting inside. In my case I had the same problem with rain, what I did was put metal roofing on the roof and walls around it to stop the water from getting in.
 

New posts New threads Active threads

Back
Top Bottom