330e437b_1gal_poultry_waterer_lg.jpeg

1 Gallon Poultry Waterer

The nesting jar reduces storage space and its lug design makes attachment easy, while the low...

General Information

The nesting jar reduces storage space and its lug design makes attachment easy, while the low profile enhances stability. Jars are molded from durable, transparent polyethylene so the water level is always visible.Snap on base also permits quick and easy cleaning, as there are no threads to accumulate dirt and germs.
  • Like
Reactions: Abriana

Latest reviews

Pros: Larger water so less refilling
Cons: pops open to easily
Pops open to easily and at 2 to 3 weeks the chicks begin roosting on them, if its not very full they will knock them over, so more work because now you're changing litter more often
Purchase Date
2007
Pros: Good size for multiple waterers. Easy to clean.
Cons: No handle to carry right side up or hang. No room for error in assembly or it will leak.
I prefer these to the 2 gallon that I've had. The lack of handle on top means you can't hang it, so it is more prone to knock over and spill. The size is great for a small backyard flock. I have 3 in my coop (80 sf) so each hen gets plenty of water.
Purchase Price
$8
Purchase Date
Fall 2017
Pros: Easy to clean
  • Like
Reactions: AJKinville

Comments

I agree...Hard to open and I had to use a kids table top to help keep shavings out. But, it was cheap, locally available and available NOW (I was waiting on my gravity feed system parts and needed something because they kept knocking over the baby waterers). It got a crack in the base with less than one month of use but luckily, my parts were here. I now use it as an extra waterer outside.
 
ive learned that if you hang it about an inch off the groud it eliminates the cleaning time by more than half. we only need to clean ours out when theyre close to being empty then we scrub them just before filling everytime.
 
ive learned that if you hang it about an inch off the groud it eliminates the cleaning time by more than half. we only need to clean ours out when theyre close to being empty then we scrub them just before filling everytime.
 
I hear you. I have to hold it with my feet to open and close it. And I bought TWO of the darn things.
 
@ Vixen, some people like to supplement their birds water with ACV for various reasons; http://poultrykeeper.com/health-suppliments/apple-cider-vinegar The main downside is it will corrode metal waterers.
Back on topic though, I've used this waterer too when I first started out. For very few birds it's okay but there are much better alternatives in plastic waterers for small flocks. The cons you listed are indeed very spot on. It's near impossible to thread back together which makes filling such a small waterer a massive chore. In addition to this and the inability to hang it - I had birds perching on it and crapping all over it and ultimately finally tossed it when the plastic base cracked because of a standard bird trying to perch on it (it was sitting on a cinderblock at the time). It's a waste of money in the long run I've found, even for a small flock.
 
I agree, and wish some company would make these with a stronger type of plastic. I'd rather spend a few more dollars at the onset to have a waterer that didn't need to be replaced entirely so often. We're in sunny South Florida where the conditions are harsh on plastic. I do try to keep them in the shadiest part of the pen, but they still wear out too soon.
 
That happened to me yesterday. I filled it, turned it over, and the bottom dropped off! What a mess. I hadn't planned on cleaning the coop that day, but since I had to swab out all the spilled water, I did. I now support the tray with my other hand when turning it.
It also has overflowed on several occasions, creating a wet coop floor. I think this product could be improved with a few more screw threads, a smoother interface for the tank and tray, and/or an O-ring. For now, I smear on Vaseline to help make a better seal.
 
This is a great waterer if i put it on a concrete brick laid on it's side, until winter. As soon as it begins freezing outside it cracks the bottom piece! In the winter only a rubber bowl works well, it gets so cold here I usually have to fill up the rubber containers 2-3 x's a day because they ice over so quickly! Otherwise 2 thumbs up!
 
Most annoying thing about this waterer is no handle, so cannot hang it, and picking it up to clean or change it hard to not spill water. I have a collection of waterers this one most irritating!
 
Tractor Supply has one that is similar. It has a handle. Hanging keeps it level. If those are on an incline you have to be sure the hole tha lets the water out is on the lower side or the water runs out on the low side before the hole is covered.
 
I've found that the easiest thing to use for a waterer is a dog or cat auto waterer. When the water in the pan gets dirty, just lift the water jug up, dump the nasty water and put the jug back on. VERY EASY!!
 
could you glue one on or make a wire bale going down to the neck and back up? It bouthers me to so I don't use them much.
 
nipple wateriers are a joke where i am as soon as summer hits they clog completely with algae and i saw a chicken get crushed by a failed bucket system so it's out of the question. I am going to buy a 3 gal top fill soon.
 
I use these in my grow out pen for the chickens that are a bit older, but not adults yet. They don't tip over easily.
 

Item information

Category
Waterers
Added by
Super Admin
Views
9,776
Watchers
5
Comments
35
Reviews
39
Last update
Rating
3.15 star(s) 39 ratings

More in Waterers

More from Super Admin

Share this item

Back
Top Bottom