We typically only get a handful of days over 90-degrees in a year.
It's 5 sq ft of 24x7 ventilation + whatever I frame out in windows for 4 on-the-smaller-side chickens (2 golden comets, 1 easter egger, 1 silkie.) That does not include the pop-door. That's all ventilation off the top so that...
If I use the plywood deck sheeting and some roof felt on top of that, how much shorter should I cut the sheeting compared to the roof? Is one upside-down U sufficient to be extended beyond the sheeting? I figure if it goes too far, it could lose structural support and bend. How far beyond the...
I guess that's where I was counting on the deck sheeting. Plus, with 4 supports, nothing would be more then 1' wide.
Still, I guess there could be some sag with heavy snow load. and it would be easy enough to add a few cross supports.
They weren't going to miss ... I was planning on placing them to line up with the bottoms of the Us.
(The picture is from the seller page. I have the base of the frame built, I have not yet attached the roof pieces.)
1) no good reason, other trying to somewhat follow the plans - which had a sub-roof. I had cut an extra roof support and will be adding two at the ends. (drawn brown) Can I screw the roof directly to that? Or would I need to add purlins perpendicular on top of those? It seems if I go into...
I'm getting ready to cut corrugated steel roofing for my small coop. Here is an edited picture from the seller of the plans I'm using as my guide.
The coop is a shade bigger than the plans called for, and I'll be making the roof a bit bigger to which will be one way I'll be adding additional...