- Thread starter
- #41
Last night I put in the shelf under the fan, and made the shelves for the egg turners. The top shelf is 1/4" plywood. The shelves for the turners are small wooden frames with 1/4" hardware cloth stapled over the frames. I also added "Y's" to the bulb sockets and put in 2 more light bulbs. (4 total) By doing this, when the controller turns the lights back on, it comes right back up in temp. With only 2 bulbs, it would drop another degree after turning on before it started climbing again.
Now, 2 more shelves (baskets) for hatchers and I am ready to rock and roll after some testing and tweeking.
Tim
Now, 2 more shelves (baskets) for hatchers and I am ready to rock and roll after some testing and tweeking.
Tim
Last edited: