- Thread starter
- #11
Not sure if that was the right way to upload the picture or not but there it is. I'd have to make it 7 ft as I'm 6'5". How far down should I dig my hardware cloth around the perimeter?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Wooaahhhh !! You're going to HC that whole thing?
Ahh....you don't need to bury the apron at all, I didn't mine and can mow over most of it without problemI wasn't very clear about my intentions. See that white sliding door? I mean to keep the chickens to the left of that door. I plan on doing the apron only around the area the chickens will be housed. What I meant to ask was how deep do I bury the apron?
From the inside I plan on doing something like your coop with the exception of the floor. I plan on still doing an apron on the inside along with the divider.
Edit-I figure that's about 30x20 ft space. Should be plenty.
If the ground is good and flat and the mesh lays flat, probably won't need to bury.I have the intention of putting a wire ceiling but may not get to it immediately.
Depending on how lazy I am I may get out the tiller and bury it shallow. Enough to just cover it up. My grass grows like weeds. I'm sure it'll fill in easy enough.