- May 2, 2015
- 546
- 71
- 134
Hi, I know it has been a long while since post but I am trying to do same thing. I am not electrical in any way think u may could help in how to flip cooler
find the two wires going to the peltier. They are the thicker wires (the small wires are for the inside fan). Cut the 2 wires the join them back up in reverse so the cut red from the power supply goes to the cut black of the peltier and the cut black from the power supply goes to the cut red of the peltier.
Add any type of thermostat between the cut red from the power supply to the cut black on the peltier and you are done
https://www.backyardchickens.com/t/976303/building-a-incubator-from-a-wine-cooler this is a more complicated wine cooler I built that uses a peltier. Ive built a few peltier incubators from simple ones that were done the way I explained above to complicated monsters
https://www.backyardchickens.com/t/1152618/tilt-turner-electrical-diagrams-and-ideas a easy to build turner design that fits in a wine cooler using pre made egg tray
If you need more technical advice start a new thread then private message me the title. If you post pictures of the cooler and the wiring then I will mark which wires do what and how to do the conversion.