This run is 6' X 12' and 6' high in the center. Made of treated 2x2's with 2x4's for the ridge board and base boards. I used 1/2" hardware cloth for the lower section and 1" chicken wire for everything else. Two people can move this without any problem. I used an air stapler (used for installing wood trim) to attach the wire to the framing. Used spring hinges on the door.

I used a 12' x 8' tarp on the run for shade and rain. Works very well.

I used the tupperware tub to ferry the girls back and forth from the brood pen to the run until I got the coop built and coupled to the run.

The coop under construction. I didn't really have a plan. Looked at alot of coop pictures and built what I thought was going to be a tractor but ended up being pretty heavy. I have a tendency to overbuild. Used 3/8" exterior ply for the outside with mostly 2x2 framing and 2x3 rafters. Floor is 2x4 and 4x4 with 3/4" treated ply. The nest boxes are 7/16 OSB framing with 3/8" exterior skin. Dimentions are 4'x8', sides are 6' from floor to top of ridge and 4' from floor to bottom of room on the ends.

This run is 6' X 12' and 6' high in the center. Made of treated 2x2's with 2x4's for the ridge board and base boards. I used 1/2" hardware cloth for the lower section and 1" chicken wire for everything else. Two people can move this without any problem. I used an air stapler (used for installing wood trim) to attach the wire to the framing. Used spring hinges on the door.

This run is 6' X 12' and 6' high in the center. Made of treated 2x2's with 2x4's for the ridge board and base boards. I used 1/2" hardware cloth for the lower section and 1" chicken wire for everything else. Two people can move this without any problem. I used an air stapler (used for installing wood trim) to attach the wire to the framing. Used spring hinges on the door.

coophead
Aug 9, 2013

There are no comments to display.