I recently bought a little giant 9300 still air. After 2 days of hand turning, i went and bought the auto egg turner. I also bought an accurite digital thermometer with hydrometer and a brinsea spot check thermometer. The digital temp setting from the factory was 99.5. It was off by about 4 degrees. I took both red plugs out and did not add any water at all. In order to achieve my 100-100.5 target temp; my digital temp setting on the bator was 103.5. The temp at the top of the eggs was 102. Temp at bottom of eggs was 100. I pretty much left it alone for 18 days. I tried candling but didnt really know what to look for so