My nailer for the coop floor. This is one of the 2x3's that my friends down the road milled out of those Cull 2X12's.
The rafters are in, upper and lower.
The major framing stuff is done, you can see the door opening for the greenhouse on the far side. The cross members are made from the cull lumber I got from the local HD, 2X2's mostly
Big changes already. The front wall, both sides and the marriage wall, all tied together. Somehow I managed to keep it all square!!!
My nailer for the coop floor. This is one of the 2x3's that my friends down the road milled out of those Cull 2X12's.
The Marriage wall. I put the nailer up on the back side to support the floor of the coop when I get to that phase. The 2X6's are recycled from a boat cover project last year. You cannot see the top plate on the wall, the angled studs are just to keep it square
The foundation. Had a few 2X10's kicking around after the snow melted, and put them to good use. This is only the base for the green house 8 feet by 6 feet
pellepeterson

My nailer for the coop floor. This is one of the 2x3's that my friends down the road milled out of those Cull 2X12's.

There are no comments to display.

Media information

Album
Added by
pellepeterson
Date added
View count
307
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top Bottom