Ok, so...The lower sheeting is on, this is a very steep angle so there should never be any standing water or snow. It faces almost straight south and made a big difference in temperature inside the open structure
A full wall/ceiling. You can see the sun reflecting off. It is a beautiful Maine day!
These were easier to install than I anticipated. I recommend using them if you are going to use the corrugated plastic stuff. The screws are supposed to to into the high bump, not in the valley, but...I bought the wrong screws so I made an adjustment! It works just fine and anchored the braces as well as the sheeting.
I had to put in purlins to support the sheets. They were almost too flexible without the cross members. Again, cull lumber!
Ok, so...The lower sheeting is on, this is a very steep angle so there should never be any standing water or snow. It faces almost straight south and made a big difference in temperature inside the open structure
You can see the double angle here, tried to make a gambrel type rig to allow more floor space, and to keep me from hitting my head when I am lugging the veggies
The rafters are in, upper and lower.
The major framing stuff is done, you can see the door opening for the greenhouse on the far side. The cross members are made from the cull lumber I got from the local HD, 2X2's mostly
pellepeterson

Ok, so...The lower sheeting is on, this is a very steep angle so there should never be any standing water or snow. It faces almost straight south and made a big difference in temperature inside the open structure

There are no comments to display.

Media information

Album
Added by
pellepeterson
Date added
View count
317
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top Bottom