The brooder box is two 2'x2' squares similar to the end panel with some old cedar 1x4 fencing nailed around them. I used additional cedar boards to create a wood floor.
The old girls are a bit sceptical about the new comers. (They should be.)
The hexagonal opening was created when I need to make the opening smaller but didn't want to add framing to attach it to. (Framing = weight) The 45 degree angle allowed me to toenail into the adjoining piece. It just happened to work perfectly to allow the feeder to poke into the box.
I rigged a small pig feeder to the outside of the brooder box with the business end inside so the feed stays dry.
The brooder box is two 2'x2' squares similar to the end panel with some old cedar 1x4 fencing nailed around them. I used additional cedar boards to create a wood floor.
The top folds up to allow access to the chicks. The bottom frame is covered with chicken wire too so the pen is totally enclosed on all 6 sides. The brooder box lid is just a frame covered with some aluminum flashing and held on with a rubber bungee. The weather has been bad and the chicks are small so I am covering it all with a tarp when/if it rains.
The two sets of window frames are held together by 2'x2' end panels made from 2x4 materials. 4 bolts with wing nuts hold everything together. The door can be flipped to allow chicks to get out but prevent adult birds from getting in.
I used the window latches for latches to hold the top. They fasten the top down very securely,
Dizzydog

The brooder box is two 2'x2' squares similar to the end panel with some old cedar 1x4 fencing nailed around them. I used additional cedar boards to create a wood floor.

There are no comments to display.

Media information

Album
Brooder Pen
Added by
Dizzydog
Date added
View count
328
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top Bottom