We started putting 1/2"x1/2" hardware cloth in the run.
The 1/2" thick T1-11 wall was painted & installed on the side of the nest boxes. We also designed that section to have 2 small doors below the henhouse to access the chickens if we need to.
My husband working on the 4 nest boxes (14x14x16) with my father-in-law helping out.
We used gravel to level the ground then sand over that for easy clean-up.
We started putting 1/2"x1/2" hardware cloth in the run.
I started painting & we put the floor of the henhouse down using 1/2" plywood raised 2 feet off the ground.
Here's the dearest husband who worked before & after going to the office to make our very first coop.
4x4 posts for the all-in-one run & coop. We designed a 6x12 henhouse & a 6x12 run attached to it.
mckeesbackyard

We started putting 1/2"x1/2" hardware cloth in the run.

There are no comments to display.

Media information

Album
"McCoop"
Added by
mckeesbackyard
Date added
View count
288
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top Bottom