Building a run

[Newfarmer36]

You are welcome. Sometimes the simplest solution is the easiest.

So I see!

 

[kjens2014]

Set your first post. Run a string from that to where the next corner post is. Set the middle post at the string. Look from first post to corner post, the middle post should be hidden.

I was just about to say set your first post, run a string to your corner post, then add your middle posts, lol.

 

[jthornton]

To get a square corner use the 3, 4, 5 rule or any multiple of 3, 4, 5. For example if you measure out 6' and put a stake in the ground then from the first point measure out 8' and move that line around until the end is 10' from the diagonal point. I hope this makes sense.

JT

 

[Newfarmer36]

thank you

 

[Fluffy Injun]

I tied a some masonry string to the bottom of my corner t-post and ran it to the opposite corner, got it really taught and used it as a guide to get my lines straight. Worked really well.