Farmers Market Chick-N-Canteen

JPSURF

In the Brooder
Joined
Jul 4, 2017
Messages
6
Reaction score
1
Points
12
I have this for my chickens and it worked great. I just noticed water not staying in it. I had this happen on the first one I bought and found a pin hole in the mold on the top. I exchanged it and this one worked for weeks. But I noticed it draining all of a sudden. I looked and looked and couldn't see any small holes. I put Hit glue on the top mold where the other one had a hole. No success It still drained. After further inspection I saw what appeared to be a crack on one of the tabs that the handle is connected to. I hang it by the handle in my cage up high to keep the water clean. I found a little crack at the tab. I hot glued the inside by both weight bearing tabs and also the outside of the two tabs. It is back to holding water. I hope this helps someone that might have the similar problem.
 

Attachments

  • IMG_6109.JPG
    IMG_6109.JPG
    311.4 KB · Views: 8
Last edited:

New posts New threads Active threads

Back
Top Bottom