Having An Incubation Dilemma

Go to any pet store that sells reptiles. If you have a petco new you they will have what you need. You need a thermostat that will keep your tempature in a safe range for your eggs. The ones that petco seel are pretty inexspensive and it will do the job just fine for small homemade incubators. It will keep the temp at 99.5 + or - 1.5 degrees. It will that a little adjusting on your part but once you watch it closely for a few hours you can figure out its range of turning off and on and then set it some where in the middle. I would use a 40 or 60 watt bulb for this setup. I ve had very good hatches in the past when I was using a small homemade bator and one of these thermostats.
Here is a link so you will know what you are looking for. They are around $40.00 and you wouldnt need any more than the 500watt one.
http://www.petco.com/product/108340/Zilla-Temperature-Controllers.aspx?CoreCat=OnSiteSearch
 

New posts New threads Active threads

Back
Top Bottom