Incuview HELP!!

Farmercharmer

In the Brooder
Joined
Apr 17, 2020
Messages
44
Reaction score
54
Points
43
I just put my eggs in today and since they have been in the temp has been a steady 101.3.

I let it run for two days, and it kept a consistent temp of 99.5 which I checked with the built in thermometer and two others I put inside.

I thought I was ready so i went to turn down the temp to ease the eggs in and the temp wouldn’t lower after setting it to 80 degrees. So I figured I would just crack it a bit and I put the eggs in. The temp stayed around 85 and after an hour I closed the lid all the way.

since then it has been reading 101.3 on my most accurate thermometer. 102 on the thermometer on the side, and incuview says 100.7.

changing temps isn’t working, changing room temp isn’t working. I have a towel underneath which I am going to take off. I’ve waited 2 hours to see if it will stabilize and it just stays the same.

Please help!
 
What kind of incubator do you have?
Where do you have your incubator at? Are there drafts, or is it by a heater, or an air conditioner?
Do you have a fan in your incubator?
 
Incuview. No drafts or heater or ac nearby, maybe got a little warm today, but only high 70s in the room, and yes there is a fan.
 

New posts New threads Active threads

Back
Top Bottom