My Incubator is not going more than 32 degress. Please help

[KaleDaDuck]

My HHD Automatic Egg incubator is really broken and the temperature is not going more than 32 degress.

When i first got it, it worked flawlessly, no issues no damage, controlled power and it hatched 100% but after successful hatches it started to go under 36 degress.. So i turned the heat up in my room and it has gone to 37 degress but it was too hot so i turned it off, after that hatch we went on a new guinea egg keet hatch and it was so horrible the temperature would'nt go more than 34 degress so i put a heat blub to get it to 36.. Next month it would never go up to 35 without a heated room or a blub.. How can i fix it and where cause i am currently in (Iraq, Baghdad) and im not sure if there is anywhere to fix, if there is a place please respond and send me the address or if there's a specific manual fix for it please describe it to me. Thanks.

 

[Ridgerunner]

From a web search that is a Chinese incubator. Do you have the operating manual or can you find the operating manual on the internet? It may have instructions on how to reset the thermostat.

You can try talking to where you bought it but I would not expect much real help there. I would e-mail HHD and ask them about it if the operating manual doesn't help.

Good luck, this can get frustrating.

 

[Shamo Hybrid]

Just search on Ebay for a new heating element, find the one that fits and order it. Pretty simple procedure, I think...... I've seen a few Chinese ones made to fit these type of incubators.

 

[2 many chickens]

It's crap, that's why. Forget a heating element, get another incubator. You should have kept the foam it came in, that's what helps keep temp stable.
Either way, I hated it. It never held temperature and had horrible hatch rate with this Chinese junk.

 

[KaleDaDuck]

Just search on Ebay for a new heating element, find the one that fits and order it. Pretty simple procedure, I think...... I've seen a few Chinese ones made to fit these type of incubators.

where can i find the heating element and where to place it in the incubator?

 

[KaleDaDuck]

It's crap, that's why. Forget a heating element, get another incubator. You should have kept the foam it came in, that's what helps keep temp stable.
Either way, I hated it. It never held temperature and had horrible hatch rate with this Chinese junk.

I Would have, but these stuff costs over 400 IQD, its so expensive thats why i wanna get it fix and for cheap!

 

[Shamo Hybrid]

where can i find the heating element and where to place it in the incubator?

Something like this. It may or may not fix your issue..... so up to you if you want to try it. It says 80 watts, I think it should work for your incubator. It also says 110v or 220v, your incubator says 220v so that is the one you should get?

HERE : https://www.amazon.com/dp/B07FR2NGN3/?tag=backy-20

 

[KaleDaDuck]

Something like this. It may or may not fix your issue..... so up to you if you want to try it. It says 80 watts, I think it should work for your incubator. It also says 110v or 220v, your incubator says 220v so that is the one you should get?

HERE : https://www.amazon.com/dp/B07FR2NGN3/?tag=backy-20

well first of all it doesn't ship to iraq and so can you give me another link? second of all i need to know how to install it? please help me!

 

[Nidai]

It's crap, that's why. Forget a heating element, get another incubator. You should have kept the foam it came in, that's what helps keep temp stable.
Either way, I hated it. It never held temperature and had horrible hatch rate with this Chinese junk.

I agree junk all right