NR 360 vs Kerbonnixs which one do you guys prefer.

[Ricenz]

I am looking for a less pricey option for incubators less than 150 dollars, but looking at the kerbonnixs it looks like its not worth the 89 dollars should I buy the nurture right or stick with the kerbonnixs? Thanks a lot!

 

[cavemanrich]

I don't have ether,,, but still have an opinion. I do read a lot. The NR 360 is a much favored incubator by many here, posting on BYC. One close friend has the NR360, and is very happy with it.
Some time ago, there were some issues, with it,, which have since been corrected.
Holds up to 22 eggs.
The Kebonnix should also do the job. (holds 12 eggs) It is less money, so may also be less value in the longer use cycle.

My choice would be the NR360. More money, but also larger.
Think what your needs are.

WISHING YOU BEST,,,,,,,,,,,,,,,,,,,,and

 

[Ricenz]

Thanks a lot!

BTW do you know why the auto turner keeps on malfunctioning for the manna pro incubator. Some people say because water piles up too much in the resovoirs and spills into the d shaped turner that causes damage. DO you have any ideas?

 

[cavemanrich]

Thanks a lot!

BTW do you know why the auto turner keeps on malfunctioning for the manna pro incubator. Some people say because water piles up too much in the resovoirs and spills into the d shaped turner that causes damage. DO you have any ideas?

It has been a while, since I read the whole thread about the NR360. It may take me a while to find that thread. The issues that I recall being resolved,, were,,, the fan hurting chick's heads. That is all corrected on newer models since then.
I have not encountered turner problems as of yet.
There have also been some solutions, to place a textured mat on bottom, to keep chicks toes from getting stuck in openings. (shelf liner) That would be placed when chicks begin to hatch, at lockdown date. Turner would be off during lockdown.

 

[Sally PB]

BTW do you know why the auto turner keeps on malfunctioning for the manna pro incubator. Some people say because water piles up too much in the resovoirs and spills into the d shaped turner that causes damage. DO you have any ideas?

You can ask this in a separate thread, if you haven't already. That might get more answers. Actually, ask any questions you have, because the knowledge pool here is both wide and deep!

And,