Today is lockdown and I want to get everything right.... I have a hydrometer/thermometer and a bulb thermometer that cam with the incubator. I have a still air little giant. The thermometers are reading different temps. the bulb one says 101 and the other 98.4. and the humidity of 37%... could my cheap ther/hyd. from walmart be wrong? I want the humidity to be high enough for the hatch but I can't seem to get it up, I would feel better if it read at least 60%......I have both the water spaces full and put 2 in two wet sponges under the wire on the bottom. I have one air hole open with a tube running to remotely add water ANY IDEAS PLEASE!
thanks in advance!
thanks in advance!
