thermometer/hygrometer

Vortex81

Songster
Apr 29, 2018
216
621
156
Delevan, NY
Hiya everyone i have a Turbofan Hova-Bator Incubator 2362N and im just using a lil thermometer taped inside the bator and a hygrometer that gives.... say like a rough estimate, not real impressed with it. Im just curious to what you all use cause im in the hunt for a new one that is digital and dual purpose. Any suggestions?
Thanks in advance :D
 
I have used a bunch of different ones. First one was an Accurate from walmart. It worked well for my first hatch but now the temperature will fluctuate from 100 to 102 for no reason. The humidity has been pretty much spot on. https://www.walmart.com/ip/AcuRite-...75035&wl11=online&wl12=16888914&wl13=&veh=sem

My second was my thermopro meat thermometer. It worked well but one of the 2 probes started giving crazy readings 10+ degrees off.

Then I bought an accurate wired thermometer. The temp is perfect but by the end of my hatch the humidity was off by over 20%. The temp still works perfectly. But this one does not turn off. It stays on until the battery is removed. It's nice that it can be placed outside the incubator but the humidity is way off now.
https://www.amazon.com/gp/product/B01M0AGWAC/ref=oh_aui_detailpage_o02_s01?ie=UTF8&psc=1

I tried a Wrenwane that is temp only. It works great and temp is spot on.
https://www.amazon.com/gp/product/B011LM7IY6/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

My current one is a thermopro tp50. It is my favorite so far. Temp and humidity are spot on. I'm going to order a couple more of these.
https://www.amazon.com/gp/product/B01H1R0K68/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

So in this pic the meat thermometer is reading 100 degrees. The Accurate from walmart is reading 102 which is wrong but the humidity is spot on. The Accurate withe the wire is reading 99.3 which is spot on but humidity is 9% higher than it really is. The Wrenware is reading 99.1 which is good. I hadn't bought the Thermopro p50 yet.
20180415_215545.jpg
 
Last edited:

New posts New threads Active threads

Back
Top Bottom