# Ideal for Reptile habitats, incubators, greenhouses etc.
# Ready to use, no wiring required. Just set for heat or cool, plug it in and set the temperature and your done!
# Controls Heating or Cooling selectable by small recessed switch at top of unit.
# 1000 watt output 125 volts 8 amps 60 hertz. 10 amp internal replaceable fast acting fuse.
# 6 foot remote sensor allows controlling enclosed habitats.
# Large easy to read dial scale with fahrenheit and celsius scales. Knob has built in resistance to movement to prevent accidental adjustment.
# 60 to 110 degree fahrenheit range and 16 to 42 degrees celsius on outer ring of scale.
# Auto shut-off if sensor is shorted or disconnected.
# Built in 2-prong polarized standard household outlet on bottom of unit.
# Sensor is waterproof and submersible.
# Power indicator lights when unit is plugged in and Output indicator lights when power is applied to built in outlet.
# Heat function turns power on to heater when temperature falls below set temperature.
# Cool function turns power on to cooling device when temperature rises above set temperature.
# Heat hysteresis is set at 0.2 degrees fahrenheit with a 1 second delay between cycles to prolong relay life.
# Cooling hysteresis is set at 2.0 degrees fahrenheit with a 5 second delay between cycles to prolong relay life.
# Ready to use, no wiring required. Just set for heat or cool, plug it in and set the temperature and your done!
# Controls Heating or Cooling selectable by small recessed switch at top of unit.
# 1000 watt output 125 volts 8 amps 60 hertz. 10 amp internal replaceable fast acting fuse.
# 6 foot remote sensor allows controlling enclosed habitats.
# Large easy to read dial scale with fahrenheit and celsius scales. Knob has built in resistance to movement to prevent accidental adjustment.
# 60 to 110 degree fahrenheit range and 16 to 42 degrees celsius on outer ring of scale.
# Auto shut-off if sensor is shorted or disconnected.
# Built in 2-prong polarized standard household outlet on bottom of unit.
# Sensor is waterproof and submersible.
# Power indicator lights when unit is plugged in and Output indicator lights when power is applied to built in outlet.
# Heat function turns power on to heater when temperature falls below set temperature.
# Cool function turns power on to cooling device when temperature rises above set temperature.
# Heat hysteresis is set at 0.2 degrees fahrenheit with a 1 second delay between cycles to prolong relay life.
# Cooling hysteresis is set at 2.0 degrees fahrenheit with a 5 second delay between cycles to prolong relay life.
Last edited:
