- Thread starter
- #161
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I was also thinking about putting it on its side but I think the measurement is the same and the turner still wont fitI guess you may have to raise it a bit and put lights on bottom an make sure you have a very good fan in it. and when you set temps make sure your temp towards the top of the egg is close to the bottom so you know your turning air around good enough, you can use cans or whatever under the bulbs make sure your fan is set to hit above the bulbs a bit then so it pushes the heat away from above and circulates it, or put bulbs flat on bottom sticking up with fan blowing over whatver works
Not even close but I bought the bulbs lolSo did you get this thing built yet?
I don't know if he'll come back here, too chattyI think the bottom one will. I think you want the output of your adapter to be greater than the combined output of your fans. Ask CC he knows electrical stuff better then I do.