fresnofarmer
Chirping
Sheetrock, exterior deck, or wood screws will work. Start pilfering the junk drawer.
X2
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Sheetrock, exterior deck, or wood screws will work. Start pilfering the junk drawer.
He'll also need washers I think or the spacers will just dig into the Styrofoam.Ok besides screws with or without nuts depending on type you'll need spacers on each screw that can be an even number of washers hard tubing or stay anything to keep in between the fan and lid you want a space no smaller than 1/2 inch and probably no larger than an inch. If you can't find screws you could thread a old wire hanger through instead.
what u mean what am I doing.I can attach it till I figure out all I need to do and find a plugwhat are you doing kid do you have zip ties by any chance . If not go to home depot get either zip ties or stanless steel screws #6 about two inchs long not wood screws machine screws with nuts you can buy them in a two pack these should fit your holes in the fan you can use a meat thermometer to punch the holes n the bator lid
Ok,what's the wire forHere, I just went back to the neighbors and took a pic of another one that I did for her. It is similar to yours. Now, don't make this any harder than it is. This was done using 2 deck screws. You don't need spacers doing it this way. Screw the screw in until you get the desired height. She hatches a lot of birds in these incubators I set up for her.
Ok,what's the wire for