- Jan 14, 2014
- 918
- 60
- 118
i used this type of elbow to make my 5 gallon feeder.... seemed alot easier to use. just set it in the bucket marked where the male end was, cut the flared end off and after drilling my hole with a 3inch hole saw and sticking the male end used the cut off piece on the out side of the bucket to hold the elbow in place.
Click image for a larger view. Hover to zoom in.
3" 90Deg PVC St Elbow
Model Number: K05820C | Menards
SKU: 6892490
0
(0)
Write a Review
$3.18 each
11% Mail-In Rebate: $0.35
Price After Rebate*: $2.83
* The displayed price after rebate shows your estimated product price after rebate.
Rebate is in the form of a merchandise credit check which may only be redeemed
in store. Some exclusions apply.
![](/proxy.php?image=http%3A%2F%2Fcds.a9t2h4q7.hwcdn.net%2Fmain%2Fstore%2F20090519001%2Fitems%2Fmedia%2FPlumbing%2Fnibco%2FProductMedium%2F48072_Large.jpg&hash=19dbb4d7fdf9323f42ae33c448fd24f7)
Click image for a larger view. Hover to zoom in.
3" 90Deg PVC St Elbow
Model Number: K05820C | Menards
![00ae.png](/proxy.php?image=http%3A%2F%2Femojione%2Fassets%2Fpng%2F00ae.png%3Fv%3D2.2.7&hash=c1709d93535ed81724a4045a440fd653)
0
(0)
Write a Review
$3.18 each
11% Mail-In Rebate: $0.35
Price After Rebate*: $2.83
* The displayed price after rebate shows your estimated product price after rebate.
Rebate is in the form of a merchandise credit check which may only be redeemed
in store. Some exclusions apply.