This is the east wall with the framing of the door complete with horizontal support studs. The doors is 37" tall x 24" wide.

This is the east wall with the framing of the door complete with horizontal support studs. The doors is 37" tall x 24" wide.

  • 0
  • 0
This is the front (south) wall after the windows have been framed with horizontal boards.

This is the front (south) wall after the windows have been framed with horizontal boards.

  • 0
  • 0
This is the west side wall of the coop after vertical studs have been added to the horizontal support beam.

This is the west side wall of the coop after vertical studs have been added to the horizontal support beam.

  • 0
  • 0
This the finished ramp. It is a 1" x 12" board with 1" x 2" pieces of spaced evenly every 6".

This the finished ramp. It is a 1" x 12" board with 1" x 2" pieces of spaced evenly every 6".

  • 0
  • 0
Another shot of the roof after shingling was complete.

Another shot of the roof after shingling was complete.

  • 0
  • 0
A shot of the coop with the roof shingled and completely painted for the first time.

A shot of the coop with the roof shingled and completely painted for the first time.

  • 0
  • 0
This the door to the coop during strapped together to insure that nothing moved over night while the wood glue dried. The door was also screwed together the next day via pocket hole joints on the backside.

This the door to the coop during strapped together to insure that nothing moved over night while the wood glue dried. The door was also screwed together the next day via pocket hole joints on the backside.

  • 0
  • 0
This is the roof after I finished shingling it.

This is the roof after I finished shingling it.

  • 0
  • 0
Side angle view after the front and back walls of the coop were erected.

Side angle view after the front and back walls of the coop were erected.

  • 0
  • 0
The roof bottom layer of plywood and frame after it was attached to the headers.

The roof bottom layer of plywood and frame after it was attached to the headers.

  • 0
  • 0
Fiberglass insulation installed in the back wall of the coop.

Fiberglass insulation installed in the back wall of the coop.

  • 0
  • 0
Fiberglass insulation installed in the floor of the coop.

Fiberglass insulation installed in the floor of the coop.

  • 0
  • 0
Fiberglass insulation installed in the front wall.

Fiberglass insulation installed in the front wall.

  • 0
  • 0

  • 0
  • 0
Front wall after inside plywood was installed and seams spray foamed.

Front wall after inside plywood was installed and seams spray foamed.

  • 0
  • 0
All of the headers of the coop installed running at a 25 degree slope.

All of the headers of the coop installed running at a 25 degree slope.

  • 0
  • 0
The roof after the top layer of plywood was added.

The roof after the top layer of plywood was added.

  • 0
  • 0
Side view of the coop front and back walls erected after the horizontal beams and outer-most headers were added.

Side view of the coop front and back walls erected after the horizontal beams and outer-most headers were added.

  • 0
  • 0
The coop front and back walls erected after the horizontal beams and outer-most headers were added.

The coop front and back walls erected after the horizontal beams and outer-most headers were added.

  • 0
  • 0
Door side wall again and you can see the fiberglass insulation laid into the floor of the coop.

Door side wall again and you can see the fiberglass insulation laid into the floor of the coop.

  • 0
  • 0
Top layer of the floor installed.

Top layer of the floor installed.

  • 0
  • 0
The roof after it has been painted.

The roof after it has been painted.

  • 0
  • 0
Door side wall with interior wall installed and seams spray foamed prior to the installation of the fiberglass insulation.

Door side wall with interior wall installed and seams spray foamed prior to the installation of the fiberglass insulation.

  • 0
  • 0
Side view of the front and west side wall. Walls are finished with 7/16" thick plywood that is secured to the 2 x 4 studs and 4 x 4 corner beams.

Side view of the front and west side wall. Walls are finished with 7/16" thick plywood that is secured to the 2 x 4 studs and 4 x 4 corner beams.

  • 0
  • 0
Heinder22

The Coop on the Hill

Images were taken through the building process of my first chicken coop.
Click to expand...
There are no comments to display.

Album information

Album owner
Heinder22
Date created
Item count
28
View count
2,154
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

Heinder22

Heinder22

Media items
28
Albums
1
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Back
Top Bottom