Navigation

  1. Chicken Breeds 4K
  2. Chicken Coops & Runs 1K
  3. Eggs 671
  4. Brooders, Incubators, Feeders & Waterers 329
  5. Other Poultry 855
  6. Miscellaneous 2K
Browse albums

Media comments

  • Gypsi
    20250716_074923.mp4
    yes and no. I've gotten a couple of teaspoons of coconut oil into her a couple of times and the hiccups would clear for a couple of days. Whatever it is isn't contagious and she is really good at outrunning me if she thinks I want to open her mouth and look inside. Maybe I should start hand...
  • C
    20250716_074923.mp4
    Anything change with your white hen
  • CCsGarden
    Pigeon
    Birds are like my babies :love
  • SnackMeat
    1000027543.jpg
    I like how it looks like, with your design choices, that the chickens are making a beer run and then going to Church. Both very cool. I feel like the coop needs some stained glass and a triptych of the Holy Egg, and a pulpit for the highest roosting chicken.
  • BigBlueHen53
    F19B7FAA-F42A-42A0-B47E-A9F065ED3989.jpeg
    Awesome!

Most media items

  1. Kiki
    15,701

    Kiki

  2. casportpony
    10,626

    casportpony

  3. R2elk
    3,624

    R2elk

  4. COChix
    3,182

    COChix

  5. WannaBeHillBilly
    2,478

    WannaBeHillBilly

Media statistics

Categories
6
Albums
40,107
Uploaded media
524,892
Embedded media
740
Comments
14,545
Disk usage
604.8 GB

Media added by KDK1

Waterer Stool

Waterer Stool

  • 0
  • 0
Feeder Stool

Feeder Stool

  • 0
  • 0
12. I failed to get pictures of the bottom and cradle as I was building this but it's really pretty simple. I just notched out 1¾" for the bottom of fill valve and screwed the cradle to the other end. It is held in place with plumbing strap. You can get a fitting at HD or Lowes to adapt the toilet supply line to an outside spigot. Hook it up to a water supply. How often you'll have to clean it depends on the number of chickens using it.

12. I failed to get pictures of the bottom and cradle as I was building this but it's really pretty simple. I just notched out 1¾" for the bottom of fill valve and screwed the cradle to the other end. It is held in place with plumbing strap. You can get a fitting at HD or Lowes to adapt the toilet supply line to an outside spigot. Hook it up to a water supply. How often you'll have to clean it depends on the number of chickens using it.

  • 0
  • 0
9. Place hardware cloth inside the sweep end of tee. Do not omit this step. (it will be held secure by the pipe). Feed filler tube through hardware cloth.

9. Place hardware cloth inside the sweep end of tee. Do not omit this step. (it will be held secure by the pipe). Feed filler tube through hardware cloth.

  • 0
  • 0
8. Cut hardware cloth circle. (place a piece of pipe on it and trace around it. Proper fit is important.

8. Cut hardware cloth circle. (place a piece of pipe on it and trace around it. Proper fit is important.

  • 0
  • 0
11. Glue the trough to the sweep side of tee

11. Glue the trough to the sweep side of tee

  • 0
  • 0
10. Glue the other end cap to the trough

10. Glue the other end cap to the trough

  • 0
  • 0
7. dry fit and mark with witness mark to ensure proper alignment.

7. dry fit and mark with witness mark to ensure proper alignment.

  • 0
  • 0
6. Cut trough

6. Cut trough

  • 0
  • 0
4. Install fill valve

4. Install fill valve

  • 0
  • 0
5. Mark out for your cut-out. (about 1/3 of the circumference of the pipe) leaving 2 or 3 inches on each end intact.

5. Mark out for your cut-out. (about 1/3 of the circumference of the pipe) leaving 2 or 3 inches on each end intact.

  • 0
  • 0
3. Glue end cap with 1" hole on bottom of tee with the hole opposite the of the sweep side of tee.

3. Glue end cap with 1" hole on bottom of tee with the hole opposite the of the sweep side of tee.

  • 0
  • 0
2. Glue clean-out fitting top of tee.

2. Glue clean-out fitting top of tee.

  • 0
  • 0
Materials needed: 1- 4" PVC (DWV) sanitary tee, a length of 4" DWV (whatever length you desire, 2- 4" DWV Flat end caps, 1- Clean-out fitting with cap, 1- toilet fill valve. 1. Drill a 1" hole in one of the end caps. Center of hole is 1" from edge of cap.

Materials needed: 1- 4" PVC (DWV) sanitary tee, a length of 4" DWV (whatever length you desire, 2- 4" DWV Flat end caps, 1- Clean-out fitting with cap, 1- toilet fill valve. 1. Drill a 1" hole in one of the end caps. Center of hole is 1" from edge of cap.

  • 0
  • 0
fill with 65# feed

fill with 65# feed

  • 0
  • 0
Insert all-thread and secure with nuts

Insert all-thread and secure with nuts

  • 0
  • 0
Drill 4 opposing holes

Drill 4 opposing holes

  • 0
  • 0
All-Thread W/nuts

All-Thread W/nuts

  • 0
  • 0
extension bucket just inside original bucket

extension bucket just inside original bucket

  • 0
  • 0
Bottom cut out of extension bucket

Bottom cut out of extension bucket

  • 0
  • 0
altered lid on bucket

altered lid on bucket

  • 0
  • 0
center cut out of lid

center cut out of lid

  • 0
  • 0
Plastic cone in bottom of bucket

Plastic cone in bottom of bucket

  • 0
  • 0
Plastic cone

Plastic cone

  • 0
  • 0
Back
Top Bottom