Anybody know what kind of incubator this is ?

[JLfarm]

Anybody know what kind or model or what company could this have come from ?

 

[Marthab1953]

It is an old Brower Incubator I had one back in the 70's

 

[JLfarm]

Thanks it was my grandpas so the 70 would be about right that's when he had all his birds and stuff

 

[JLfarm]

Do you know if there would have been some instructions that would have came with it ?

 

[Marthab1953]

At one time there was but it is such an old model hard to tell if you can find any. I will do some searching on the internet and see what I can find. You need a few parts for it like a new wafer, Thermostat, Heating element. did not come with a turner but will hold around 100 eggs.

 

[Marthab1953]

Could you take it apart and take more pictures to see what is still with it?

 

[JLfarm]

I'm sorry I don't understand your question but I know it works if that is what u r asking

 

[Marthab1953]

I'm sorry I don't understand your question but I know it works if that is what u r asking

ok then it works that is great.

I found some instructions that might help
http://browerequip.com/documents/Instruction Sheets/bulb brooder.pdf

 

[Marthab1953]

Also found this on internet hope it helps.

How-to opperate the brower incubator Model 11400-3 100 egg?
This has a snap switch and waffer to adjust heat range has a 166 watt heating element still available thru Cutler supply poultry cat. no auto egg turner, no fan . There is a adjusting thrumb screw clock wise decrease heat counter clock wise increase heat. Back during its day heat setting was for still air 102 . you can add bowel with sponge for humitity water.

 

[Marthab1953]

here are the heat elements 1 is for 50 egg incubato other is for 100 egg incubator


http://cutlersupply.com/zen_new51/i...id=329&zenid=98928a665827bbfe7820e3543a57a3d3

http://cutlersupply.com/zen_new51/index.php?main_page=product_info&products_id=330