Ive read your Big Ol Ventilation page atleast 10 times and still have some questions. I have a 10x16 shed and I partitioned a wall off half way back for my coop. So the actual coop is 8x10 but since there is more hot air I included the entire building dimensions. So far i've installed a 2'x4' old RV hand crank louvered window on the rear of the coop (about four feet off the floor to the bottom of the window). And 12"x12" louvered vents on each end at the top of the building.
I was wondering once I install one of the wind turbines on the roof (the one powered by air) how much more do I need? The front of the shed is limited due to my large double doors. I can't put anything on the sides because those walls are so low it would be a draft and not good ventilation. Does that sound sufficient enough?
If anyone else has a suggestion please let me know. Thanks ahead.
I was wondering once I install one of the wind turbines on the roof (the one powered by air) how much more do I need? The front of the shed is limited due to my large double doors. I can't put anything on the sides because those walls are so low it would be a draft and not good ventilation. Does that sound sufficient enough?
If anyone else has a suggestion please let me know. Thanks ahead.