

Last edited:
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Just browsing your thread. The feeder is almost identical to the one I use for my banties [except for the great filer top! WOW!] I use a 2" to 4" pvc adapter in the brooder, then add the tall pipes when they go to the grow-out pens [2'tall - an adapted puppy play pen] and 4' tall for the coop. The way I prevent spillage is to cut the cardboard roll from toilet tissue in half, fit it into the hole in the center of the jar-feeder-bottom so that it is within 1/2" of the bottom before I add the adapter -- this prevents the feed from being close enough to the feeder openings to being scooped out. This em of an idea came from another BYCer and works great! Just passing on his random act of kindness in sharing. Thinking of hatching some buttons to donate to nursing homes to keep their aviary pen's floors clean. Know myself well enough to know I will want to keep a few![]()
![]()
Here is a picture of my base.you can't see the cardboard TT roll inside it fits tightly enough to stay where you put it. I also use just the one adapter 4" to 2". When I add the 4" PVC pipe, I will turn over the 4" 'test lid', drill a hole in it, thread a 12" length of nylon rope thru', tie a double overhand knot in the 'tube end' and a loop knot on the outside for a handle to pull it off/out for filling [no fingernails to pry it loose]![]()
![]()
ETA pictures