Brinsea Octagon 20 calibration

[joshremlin]

Hi Guys,

Ive been out the game some time now but saved everything!

where would one get his sensors calibrated on a brinsea octagon 20? It's not been used for a good year or two!

thanks

 

[Uff Da]

You calibrate it yourself by checking it with a thermometer that is known to be accurate, such as a professional meat thermometer or a good body temp thermometer. If you don't have a way to get your known accurate therm in the incubator, you can calibrate a thermometer that will fit inside using your known accurate thermometer. If you do have to make adjustments, which is unlikely with a Brinsea, there is a little screw you turn. I don't know where it is located in the Octagon 20, but you should be able to find a manual that tells you. You only turn the screw a very small amount with the Brinseas.

Thermometer calibration

 

[BrinseaUS]

Hello! Calibration info is on page 12: http://brinsea.com/Manuals/Oct2040AdvanceUS.pdf

If you would rather send it to us to have it calibrated we still service the older models