Brinsea temp issue

[Mustafamadan]

I have a new brinsea ova easy 100 .
This is the second time incubating , the temp was set to 37.5 C , it was fluctuating between 37.5-37.6 which is the normal (asterisk pulsing at 37.5) .
On this time incubation the temp is fluctuating 37.4 -37.5 (asterisk pulsing at 37.4 ) although the same temp is set , i know it is insignificant but iam concern about it,the room temp is the same around 25.
Please share what you expect

 

[casportpony]

Welcome to BYC. Sounds pretty normal to me.

 

[ChloeSilkie08]

Welcome!
I set my incubators to 38 degrees celcius.

 

[Mustafamadan]

Here is an update.
After emailing and contacting brinsea representitives and sales, no one really addressed the issue , so i went to reset the machine to factory settings and guess what , it worked well again !. But i needed to check and calibrate it.

 

[spartacus_63]

IMHO, a 1/2 degree would not make a difference. Even a full degree and I would say 1.5° would not be reason for concern, but being accurate does settle the mind. Great job in resolving the issue.

 

[Mustafamadan]

you are right, but knowing there is a control malfunctioning with precious eggs is concerning, especially if you owe a costly incubator !

 

[aart]

you are right, but knowing there is a control malfunctioning with precious eggs is concerning, especially if you owe a costly incubator !

Sounds like something is/was wrong with the display.....
....or do you have a separate calibrated thermometer inside the bator?

 

[Mustafamadan]

Sounds like something is/was wrong with the display.....
....or do you have a separate calibrated thermometer inside the bator?

I used the medical mercury in glass thermometer, i used 3 of them unfortunatly one break on the ground, anyways on the center it shows 37.7 , on the periphry it reads 37.5 so i am happy with this.