Easy and Inexpensive Run & Coop Ideas?

[zackcrack]

I have a ton of loose pallets in the barn. I could probably make something like yours, @ShanandGem! I'm getting so many great ideas, thanks everyone!

 

[Erin22]

I did something similar with cattle panels, but we didn't use wood at the bottom. Instead we drove steel fence posts into the ground and then anchored the cattle panels to them. The posts are on the outside of the run with the panels pressing outward against them, which is a tremendous help stability-wise. We covered the panels with chicken wire to exclude overhead predators (would never use chicken wire alone to protect anything!) and then we ran hardware cloth from about 2 feet up, down to the ground, then folded it outward at the bottom for an apron. We anchored that down with landscape fabric staples and the grass grows right up through it, so we can mow right over it all the way to the edge of the run. Short grass around the edges prevents snakes and rodents from having hiding places right next to the run.

We live on a corner lot in town, so our backyard where the coop and run are located can be seen from two sides of the street, as well as by our neighbors next door. At the time, I was on the town council so it was doubly important to me that our run not be an eyesore. To achieve that we simply put up a decorative fence in front of it, made of inexpensive vinyl lattice. I love it! For shade, we simply toss a roll of landscape fabric over it in a couple of places and tie it off with metal lathe strips, pre-drilled and easily available at any big box home store. If you've ever used that stuff - not the kind that looks like fiber meshed all twisty and almost fuzzy, but the stuff that's black on one side and brown on the other and has a texture that looks like nylon netting - you know that when you pour water on it the water just sits there and pools. It either runs down wrinkles until it reaches the hole where your plant is, or it very slowly seeps in. That's what I like the best about it. It provides rain protection because the water doesn't instantly seep through. It just runs down the sides to the ground. It's also very air permeable, so instead of it being like a tarp and holding the heat in at the top, air can circulate all the way through it. If it rips in high winds, take it off and put another piece in its place, easy to do because it's so inexpensive. We can also roll ours up in section, like a window shade, to give them sunny spots when it's super nice out.

This has stood up beautifully to whatever wild weather Wyoming throws at it, including winds sometimes in excess of 60mph and the snow load. It's tall enough that we can work it there without hunching over. I wouldn't change a thing about our run. When we decided to expand it, we simply took off the end (which was created with leftover fencing from another project), we added two more fenceposts - one on either end - arched another cattle panel, covered it like we did the original section, then put the end cap back on. Took just a few hours to do. The end piece came off with the chicken wire and hardware cloth left in one piece, so it was easy to just stand it back up and wire it back into place.

This run was easy and inexpensive to build. Ken and I are both in our 60s and both partially disabled, and we did it without any help or trouble at all. The first winter we draped more lattice over it to act as a spacer so any pokey-outy things from the chicken wire didn't rip up the clear green house plastic we put on for winter protection. This works so well that I even brood chicks outdoors when the snow is still flying!

The beauty is that you don't have to do everything at once! Get the cattle panel run built with it's predator protection, then if you decide to do more it's easy to just add to it.....lattice, plastic, landscape fabric, or whatever - as time and money permit. I'm so glad we did it this way!

Details can be found on My Coop page, about halfway down. The link is under my avatar. But here are couple of photos.


There's enough outward tension that the panels stayed in place against the fence posts until we had made the final decision on the placement of the other side. Then we wired the panels to the posts. It hasn't ever even budged!



The original run. Notice the landscape fabric for shade and air circulation.


When we expanded it, the entire end came off in one piece, just as it was designed to do. If you look closely at the far right center, you can make out the hardware cloth apron to protect against digging predators.


Wiring the new panel into place.


The addition put on, just waiting for it's lattice! We tried using a "reflective' tarp at this point - it was a disaster! Too hot, too stuffy, not enough air circulation. We went back to landscape fabric.


Wind and snow don't even faze it.


Inside you can see the brooder pen with chicks in it taking put some of one side. The space is cut down in there when the pen is up, but since it's only up for about 4 weeks until the chicks are fully integrated with the flock, it's no hardship. It just folds up when we're done with it. It's so bright and airy in there.

Where's the link located? Would love to know more

 

[paintedChix]

Where's the link located? Would love to know more

What link are you are referring to?

 

[ChickyCh00k]

Where's the link located? Would love to know more

This thread is from 8 years ago, so you may not receive a response from the individual you quoted. If you're looking for a link to Blooie's setup, this is it:

https://www.backyardchickens.com/articles/motel-chix.67240/

 

[KayMMRogers]

I did something similar with cattle panels, but we didn't use wood at the bottom. Instead we drove steel fence posts into the ground and then anchored the cattle panels to them. The posts are on the outside of the run with the panels pressing outward against them, which is a tremendous help stability-wise. We covered the panels with chicken wire to exclude overhead predators (would never use chicken wire alone to protect anything!) and then we ran hardware cloth from about 2 feet up, down to the ground, then folded it outward at the bottom for an apron. We anchored that down with landscape fabric staples and the grass grows right up through it, so we can mow right over it all the way to the edge of the run. Short grass around the edges prevents snakes and rodents from having hiding places right next to the run.

We live on a corner lot in town, so our backyard where the coop and run are located can be seen from two sides of the street, as well as by our neighbors next door. At the time, I was on the town council so it was doubly important to me that our run not be an eyesore. To achieve that we simply put up a decorative fence in front of it, made of inexpensive vinyl lattice. I love it! For shade, we simply toss a roll of landscape fabric over it in a couple of places and tie it off with metal lathe strips, pre-drilled and easily available at any big box home store. If you've ever used that stuff - not the kind that looks like fiber meshed all twisty and almost fuzzy, but the stuff that's black on one side and brown on the other and has a texture that looks like nylon netting - you know that when you pour water on it the water just sits there and pools. It either runs down wrinkles until it reaches the hole where your plant is, or it very slowly seeps in. That's what I like the best about it. It provides rain protection because the water doesn't instantly seep through. It just runs down the sides to the ground. It's also very air permeable, so instead of it being like a tarp and holding the heat in at the top, air can circulate all the way through it. If it rips in high winds, take it off and put another piece in its place, easy to do because it's so inexpensive. We can also roll ours up in section, like a window shade, to give them sunny spots when it's super nice out.

This has stood up beautifully to whatever wild weather Wyoming throws at it, including winds sometimes in excess of 60mph and the snow load. It's tall enough that we can work it there without hunching over. I wouldn't change a thing about our run. When we decided to expand it, we simply took off the end (which was created with leftover fencing from another project), we added two more fenceposts - one on either end - arched another cattle panel, covered it like we did the original section, then put the end cap back on. Took just a few hours to do. The end piece came off with the chicken wire and hardware cloth left in one piece, so it was easy to just stand it back up and wire it back into place.

This run was easy and inexpensive to build. Ken and I are both in our 60s and both partially disabled, and we did it without any help or trouble at all. The first winter we draped more lattice over it to act as a spacer so any pokey-outy things from the chicken wire didn't rip up the clear green house plastic we put on for winter protection. This works so well that I even brood chicks outdoors when the snow is still flying!

The beauty is that you don't have to do everything at once! Get the cattle panel run built with it's predator protection, then if you decide to do more it's easy to just add to it.....lattice, plastic, landscape fabric, or whatever - as time and money permit. I'm so glad we did it this way!

Details can be found on My Coop page, about halfway down. The link is under my avatar. But here are couple of photos.


There's enough outward tension that the panels stayed in place against the fence posts until we had made the final decision on the placement of the other side. Then we wired the panels to the posts. It hasn't ever even budged!



The original run. Notice the landscape fabric for shade and air circulation.


When we expanded it, the entire end came off in one piece, just as it was designed to do. If you look closely at the far right center, you can make out the hardware cloth apron to protect against digging predators.


Wiring the new panel into place.


The addition put on, just waiting for it's lattice! We tried using a "reflective' tarp at this point - it was a disaster! Too hot, too stuffy, not enough air circulation. We went back to landscape fabric.


Wind and snow don't even faze it.


Inside you can see the brooder pen with chicks in it taking put some of one side. The space is cut down in there when the pen is up, but since it's only up for about 4 weeks until the chicks are fully integrated with the flock, it's no hardship. It just folds up when we're done with it. It's so bright and airy in there.

Can I see a close up of your door??

 

[KayMMRogers]

I did something similar with cattle panels, but we didn't use wood at the bottom. Instead we drove steel fence posts into the ground and then anchored the cattle panels to them. The posts are on the outside of the run with the panels pressing outward against them, which is a tremendous help stability-wise. We covered the panels with chicken wire to exclude overhead predators (would never use chicken wire alone to protect anything!) and then we ran hardware cloth from about 2 feet up, down to the ground, then folded it outward at the bottom for an apron. We anchored that down with landscape fabric staples and the grass grows right up through it, so we can mow right over it all the way to the edge of the run. Short grass around the edges prevents snakes and rodents from having hiding places right next to the run.

We live on a corner lot in town, so our backyard where the coop and run are located can be seen from two sides of the street, as well as by our neighbors next door. At the time, I was on the town council so it was doubly important to me that our run not be an eyesore. To achieve that we simply put up a decorative fence in front of it, made of inexpensive vinyl lattice. I love it! For shade, we simply toss a roll of landscape fabric over it in a couple of places and tie it off with metal lathe strips, pre-drilled and easily available at any big box home store. If you've ever used that stuff - not the kind that looks like fiber meshed all twisty and almost fuzzy, but the stuff that's black on one side and brown on the other and has a texture that looks like nylon netting - you know that when you pour water on it the water just sits there and pools. It either runs down wrinkles until it reaches the hole where your plant is, or it very slowly seeps in. That's what I like the best about it. It provides rain protection because the water doesn't instantly seep through. It just runs down the sides to the ground. It's also very air permeable, so instead of it being like a tarp and holding the heat in at the top, air can circulate all the way through it. If it rips in high winds, take it off and put another piece in its place, easy to do because it's so inexpensive. We can also roll ours up in section, like a window shade, to give them sunny spots when it's super nice out.

This has stood up beautifully to whatever wild weather Wyoming throws at it, including winds sometimes in excess of 60mph and the snow load. It's tall enough that we can work it there without hunching over. I wouldn't change a thing about our run. When we decided to expand it, we simply took off the end (which was created with leftover fencing from another project), we added two more fenceposts - one on either end - arched another cattle panel, covered it like we did the original section, then put the end cap back on. Took just a few hours to do. The end piece came off with the chicken wire and hardware cloth left in one piece, so it was easy to just stand it back up and wire it back into place.

This run was easy and inexpensive to build. Ken and I are both in our 60s and both partially disabled, and we did it without any help or trouble at all. The first winter we draped more lattice over it to act as a spacer so any pokey-outy things from the chicken wire didn't rip up the clear green house plastic we put on for winter protection. This works so well that I even brood chicks outdoors when the snow is still flying!

The beauty is that you don't have to do everything at once! Get the cattle panel run built with it's predator protection, then if you decide to do more it's easy to just add to it.....lattice, plastic, landscape fabric, or whatever - as time and money permit. I'm so glad we did it this way!

Details can be found on My Coop page, about halfway down. The link is under my avatar. But here are couple of photos.


There's enough outward tension that the panels stayed in place against the fence posts until we had made the final decision on the placement of the other side. Then we wired the panels to the posts. It hasn't ever even budged!



The original run. Notice the landscape fabric for shade and air circulation.


When we expanded it, the entire end came off in one piece, just as it was designed to do. If you look closely at the far right center, you can make out the hardware cloth apron to protect against digging predators.


Wiring the new panel into place.


The addition put on, just waiting for it's lattice! We tried using a "reflective' tarp at this point - it was a disaster! Too hot, too stuffy, not enough air circulation. We went back to landscape fabric.


Wind and snow don't even faze it.


Inside you can see the brooder pen with chicks in it taking put some of one side. The space is cut down in there when the pen is up, but since it's only up for about 4 weeks until the chicks are fully integrated with the flock, it's no hardship. It just folds up when we're done with it. It's so bright and airy in there.

Is there anyway I could see a close up of how you built your door?

 

[ChickyCh00k]

Can I see a close up of your door??

This thread is from 8 years ago, so you may not receive a response from the individual you quoted. If you're looking for info on Blooie's setup, this is a link to it:

https://www.backyardchickens.com/articles/motel-chix.67240/