So I have a full incubator (2 dozen) in the Brinsea Eco 20. And they have been in the incubator just over 24 hours. The humidity with one trough filled half way has been 35-37 %. So I filled the other trough with warm water half way as well. The vent is open only half way. Am I going about this the right way to increase the humidity? I just want the best success rate possible for an incubation noob like myself.
Thanks in advance,
Russell
P.S. The temp has been stable at about 100 degrees at the glass thermo.
Thanks in advance,
Russell
P.S. The temp has been stable at about 100 degrees at the glass thermo.