hatching problem Please help

Blueroo63

Songster
10 Years
Feb 8, 2009
555
1
151
N.Texas
I have2 cabinet stile incubator and a hatcher,incuabing looks and seem to go ok,but when i put the eggs into hatcher they are not coming out please help.temp in hatcher 99.9 and humity 48 % can't seem to get it any higher do I need it higher and any suggestion would be very helpful thanks glenda
 
Last edited by a moderator:
what type do you have? Yes you do need the humidity up to 55 to 65% in the hatcher and the temp. up to about 100 would be great also
 
I was having problems with my humidity as well on the cabinet incubator that I built. I found that the door was the problem. I installed some weatherstripping where the door closed against it and TA-DAA My humidity rose nearly 15 % in the next 2 hours. I had to take out some water to keep it where it was supposed to be! I'm not by any means an expert in this region, just what I found in my circumstance. Good Luck!
Dick
 

New posts New threads Active threads

Back
Top Bottom