HELP! RCom Pro 10 Days to Hatch accidently reset

[clyderiver77]

Hey gang, I just opened the incubator to candle an egg and I accidently pressed a button resetting the Days to hatch clock. Since the machine does auto humidity during lockdown and stops rotating, if I don't somehow fix this, the hatch is not going to be right I don't think. Anyone know how to fix? The manufacturer is in Korea and I am afraid of a big phone bill and/or language barrier if I call them. Can anyone help?

 

[talkturkey]

Lyon Technologies may be able to help
Telephone: (888) LYON – USA
Telephone: (619) 216 – 3400
FAX: (619) 216 – 3434
E-mail: [email protected]
from the rcom manual-
This is used when you want to change incubation


setting mode again during incubation.

Press MANUAL button during incubation, then

Temp. display will blink.

If you want to change Temp. reset with UP/DOWN button

and then press ENTER to save.

Using this method, you can also reset humidity, egg turning

angle, and egg turning interval. If you do not want to change

setting, just press MANUAL button then it passed to next stage.

Also, it returns to incubation screen if you do not press

any key for about 10sec.

You can go directly to the needed setting mode by


pressing MANUAL button several times according to your needs.

It can be used when you want to check the current incubation

condition during incubation.

If you press ENTER button, LCD display indicates


setting Temp. & Humidity.

 

[clyderiver77]

Lyon Technologies may be able to help
Telephone: (888) LYON – USA
Telephone: (619) 216 – 3400
FAX: (619) 216 – 3434
E-mail: [email protected]

Thank you, I gave them a call and they said they would try and find an answer and get back to me. I hope! In the meantime, anybody else maybe know how to fix this?

Or, how to adjust the humidity setting? Darn instruction manual is not very clear.