Help !! Un-even incubator temperature

[incubatorl0ver]

was 1 degree variation

 

[Dragons4u]

Wow, really? Lol, I thought you had a much bigger variation than that to start with.
.3 doesn't sound bad at all. I think it's better than my purchased incubator.
Try running it a while with your water tubs in there with water.
When you started the thread I thought you meant it was a way big difference.

 

[incubatorl0ver]

no it was 1 degree and in one side !
thats what made me wonder
what do you think the lower degree that can hatch eggs so i made it the lowest degree incubator could down to

 

[Dragons4u]

Well, now that you are at a .3 roughly run it around 99.8 and you should be good to go, I would think.
Plus your egg trays or turner and water filled tubs will probably stabilize it even slightly more.
Are you planning to use motorized or hand turners? Remember the motors produce a bit of heat, so if you are using them, mount them on the cooler side and that problem disappears.

 

[incubatorl0ver]

Well, now that you are at a .3 roughly run it around 99.8 and you should be good to go, I would think.
Plus your egg trays or turner and water filled tubs will probably stabilize it even slightly more.
Are you planning to use motorized or hand turners? Remember the motors produce a bit of heat, so if you are using them, mount them on the cooler side and that problem disappears.

the motor in the cooler are already
and theres a video about my incubator

 

[Dragons4u]

Looks good.
Good luck with it!