How much to build this?

[BlindLemonChicken]

Don’t forget to get extra hwc to build an apron so nothing can dig under.

 

[chickenana707]

This is a really good list from Nonafel.

I would add:

Stain or paint supplies at $70ish. Even with treated lumber you want to protect the wood to make it last and look good.

Scrap linoleum to protect the inside coop floor - $20

Power tools, if you don’t have them at least a decent circular saw and hammer drill to drive screws (you are gonna want to put it all together with screws not nails) maybe $300? It’s been a while since I bought any, I inherited most of my tools from my father.

Thank you!! This is so helpful. Luckily we have access to probably most of not all tools this would require, so we’d save some money there. I definitely would want to paint and do the floor like you said to make cleaning easier and protect the wood

 

[perkolator]

I get a bigger total, because to me the dimensions look bigger at around 6ft W x 12ft L footprint, with 6ft run walls. Enclosed coop around 4Hx6Wx4L, all vertical supports look like 4x4 posts, unknown what's inside the coop such as nest boxes, wall framing, etc.

I'd budget for around $1000-1200 for just materials, based on Home Depot prices. You could likely get it down a little less depending on what size lumber you use, but I think it'll still be approaching that number

5ct 4x4x12 = ~$90 (verticals, cut in half)
6ct 2x6x12 = ~$65 (bottom skid w/cross beams, roof ridge beam, and maybe floor supports under coop) I would use
20ct 2x4x8 = ~$75
6ct 4x8x8 wood siding or plywood = ~$200+ depending on material (4pc for walls, 1pc for floor, 1pc for misc. items like nest boxes/etc.)
6ct 1x4x12 roof purlins = ~$50
7ct 12ft roofing = corrugated $250 + 2pc ridge cap $50 (pictured ribbed roofing $550 + ridge cap $70)
1/2"hc 4x100 = $100 online
Hinges/handles/latches = $50+
Hardware/fasteners = $50+ (at least 2 boxes 3" screws for framing, shorter screws for plywood and misc., roof fasteners, staples for HC, etc.)
Paint = $75

Good luck with the coop planning and build!

 

[chickenana707]

Thank you! The one we got quoted was $2300 with delivery and unpainted so we figure as long as we can keep costs low enough to make it worth it. Even with your higher end costs I think its still worth it! Thanks for your input.

 

[StinkyAcres]

I get a bigger total, because to me the dimensions look bigger at around 6ft W x 12ft L footprint, with 6ft run walls. Enclosed coop around 4Hx6Wx4L, all vertical supports look like 4x4 posts, unknown what's inside the coop such as nest boxes, wall framing, etc.

I'd budget for around $1000-1200 for just materials, based on Home Depot prices. You could likely get it down a little less depending on what size lumber you use, but I think it'll still be approaching that number

5ct 4x4x12 = ~$90 (verticals, cut in half)
6ct 2x6x12 = ~$65 (bottom skid w/cross beams, roof ridge beam, and maybe floor supports under coop) I would use
20ct 2x4x8 = ~$75
6ct 4x8x8 wood siding or plywood = ~$200+ depending on material (4pc for walls, 1pc for floor, 1pc for misc. items like nest boxes/etc.)
6ct 1x4x12 roof purlins = ~$50
7ct 12ft roofing = corrugated $250 + 2pc ridge cap $50 (pictured ribbed roofing $550 + ridge cap $70)
1/2"hc 4x100 = $100 online
Hinges/handles/latches = $50+
Hardware/fasteners = $50+ (at least 2 boxes 3" screws for framing, shorter screws for plywood and misc., roof fasteners, staples for HC, etc.)
Paint = $75

Good luck with the coop planning and build!

I agree, it looks much bigger - 12x6 seems right. A few years ago I priced out a 4x8 coop without a run and it came to about $500.

Hardware cloth, and most other fencing for that matter, can usually be purchased on Amazon or other places online for much cheaper than from most local hardware stores. Make sure to get galvanized 19-gauge with 1/2" squares.

 

[Appalachickens]

This is a really good list from Nonafel.

I would add:

Stain or paint supplies at $70ish. Even with treated lumber you want to protect the wood to make it last and look good.

Scrap linoleum to protect the inside coop floor - $20

Power tools, if you don’t have them at least a decent circular saw and hammer drill to drive screws (you are gonna want to put it all together with screws not nails) maybe $300? It’s been a while since I bought any, I inherited most of my tools from my father.

My son who is a carpenter framed two of my coops and he insisted on using nails for framing. Something about shearing and the different strength of nails vs. screws. I used screws for everything else - putting on siding, supports for roost bars, roofing, and so on. Also, for screws, I recommend star bit screws - they don't strip and are easier to get back out if need be.

 

[Smokerbill]

Home Depots often have cull lumber available at 70% off the retail price. I've bought lots of lumber that way that's perfectly fine for building a coop and run. From what I've seen, Monday morning is a good time to check for cull lumber.

 

[Nonafel]

Thank you!! This is so helpful. Luckily we have access to probably most of not all tools this would require, so we’d save some money there. I definitely would want to paint and do the floor like you said to make cleaning easier and protect the wood

Please note treated 4x8 plywood is crazy expensive compared to a normal 4x8 plywood. Simply using normal plywood you basically cover your paint costs.

If it's a 12x6 then you simply use 4x6x12s on the bottom and 12 foot metal roofing, filling in the gaps as needed. Would add an additional 4 2x4s then?

I've used treated wood for all my chickens with zero issues, at least where the unpainted wood gets exposed to water and wet chicken feet. Others may have opinions.

My son who is a carpenter framed two of my coops and he insisted on using nails for framing. Something about shearing and the different strength of nails vs. screws. I used screws for everything else - putting on siding, supports for roost bars, roofing, and so on. Also, for screws, I recommend star bit screws - they don't strip and are easier to get back out if need be.

I'd agree mostly, you can screw then nail your critical pieces once they are in the right place. Bigger screws make a real difference, and don't be that guy who wants to use drywall screws for wood...

I actually used a few timber spikes for my corners and stuff on builds. Big ol bulky nails, needed a guide hole for best results but man they hold. These tend to be sold individually.

 

[Nonafel]

Home Depots often have cull lumber available at 70% off the retail price. I've bought lots of lumber that way that's perfectly fine for building a coop and run. From what I've seen, Monday morning is a good time to check for cull lumber.

Different locations have different rates for putting it out.
I've got two in my reach one place has it all the time the other location effectively never.

It's good advice though. Those warped 2x4xwhatevers? Great roosting bars.