How would I add more ventilation to this shed?

Open up all the soffits - the roof overhang isn't wide but there's a board hanging down all the way around that'll easily provide weather protection.

I'd add more windows as well, either top hinged awning style or place conventional windows smartly in directions facing away from prevailing winds.
 
I have a plastic shed. I used house metal vent covers. I cut rectangle holes just a bit smaller then the vents and used screws to attach it. Because the plastic isnt that thick, I used a block of wood to screw the screws into on the back side of the plastic.
You could put one or two on each side up higher above the roosts. Because the vents I used are metal, I use magnets to cover some of them for winter.
 
Open up all the soffits - the roof overhang isn't wide but there's a board hanging down all the way around that'll easily provide weather protection.

I'd add more windows as well, either top hinged awning style or place conventional windows smartly in directions facing away from prevailing winds.
If I added small vents on the two top sides of the coop... would that work?
 

New posts New threads Active threads

Back
Top Bottom